<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
8.6436MHz
Mfr. Part #:
KBD864362030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD864362030
Product Description
Product Overview
This specification outlines the details for the Quartz Crystal Resonator, model HC-49USSMD, designed for applications requiring precise frequency control. It details general, electrical, and mechanical parameters, along with environmental and mechanical endurance testing procedures.
Product Attributes
- Brand: (Kaiyuexiang)
- Origin: (Shenzhen Kaiyuexiang Electronics Co., Ltd.)
Technical Specifications
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| General Specifications | |||
| Holder Type | HC-49USSMD | ||
| Mode of Vibration | AT CUT | FUND S&A | |
| Oscillation Mode | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Electrical Parameters | |||
| Normal Frequency | 8.6436 | MHz | |
| Frequency Tolerance (252) | ±30 | ppm | |
| Temperature Stability | ±20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 MAX | PF | |
| Shunt Capacitance | |||
| Effective Series Resistance | 250 MAX | ||
| Insulation Resistance | 500 MIN | M OHMS | AT DC 100V |
| Mechanical Parameters | |||
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Shock Resistance | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Resistance | Frequency: 1055Hz, Amplitude: 1.5mm P-P, Duration: 2 hours/each direction (X.Y.Z) | ||
| Strength of Terminals/Lead-wires (Pulling) | 900g tension weight for 30 sec. No visual damages. | ||
| Strength of Terminals/Lead-wires (Bending) | 90 degree bending with 225g tension weight. No visual damages. | ||
| Sealing Tightness | No gas bubble after specimen in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Dipped into solder at +2305 for 3sec. Dipping depth 2mm. Soldering portion >90%. | (After applying ROSIN flux) | |
| Solder Heating | Dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. Electrical characteristics shall be satisfied. | ||
| Environmental Endurance | |||
| Humidity Resistance | Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% RH. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | (Refer to Fig-2) | |
2409272302_KYX-KBD864362030_C18209172.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
