<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
18pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
24MHz
Mfr. Part #:
KUS240001820
Package:
HC-49S
Key Attributes
Model Number:
KUS240001820
Product Description
- HC-49SJJ/24.000MHZ
: HC-49SJJ/24.000MHZ
- : (Kaiyuexiang)
- : KUS240001820
- :
| - | ||
| HC-49SJJ/24.000MHZ | - | |
| 18PF/20ppm | - | |
| (HOLDER TYPE) | 49US | - |
| (MODE OF VIBRATION) | AT CUT | - |
| (OSCILLATION MODE) | FUNDAMENTAL | - |
| (TEST FACILITIES) | S&A KH-1240 | - |
| (STORAGE TEMPERATURE) | -40 TO +85 | - |
| (DRIVER LEVEL) | 100W | - |
| (NORMAL FREQUENCY) | 24.000 MHz | - |
| (FREQUENCY TOLERANCE) | 20ppm | (252) |
| (TEMPERATURE STABILITY) | 20ppm | - |
| (OPERATING TEMPERATURE RANGE) | -20 TO +70 | - |
| (LOAD CAPACITANCE) | 18 PF | - |
| (MOTIONAL CAPACITANE) | 3PF MAX | - |
| (SHUNT CAPACITANCE) | - | () |
| (EFFECTIVE SERIES RESISTANCE) | 40 MAX | - |
| (INSULATION RESISTANCE) | 500M OHMS MIN | AT DC 100V |
| (SOLDERABILITY) | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | - |
| - (MECHANICAL ENDURANCE - SHOCK) | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | - |
| - (MECHANICAL ENDURANCE - VIBRATION) | Electrical characteristics shall be satisfied after supplying following Vibration: Frequency 1055Hz, Period 12min, Amplitude 1.5mm PP, Direction X.Y.Z, Time 2hours/each direction. | - |
| - / (MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES) | : 900g tension weight for 30 sec. : 90degree bending with 225gs tension weight. | - |
| (SEALING TIGHTNESS) | No gas bubble after specimen put in hot water at +90+95 for 5 min. | - |
| (SOLDERING DIP) | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion over 90%. | - |
| (SOLDER HEATING) | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | - |
| - (ENVIRONMENTAL ENDURANCE - HUMIDITY) | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. | - |
| - (ENVIRONMENTAL ENDURANCE - STORAGE IN LOW TEMPERATURE) | Electrical characteristics shall be satisfied after 250 hours at -302. | - |
| - (ENVIRONMENTAL ENDURANCE - STORAGE IN HIGH TEMPERATURE) | Electrical characteristics shall be satisfied after 250 hours at +852. | - |
| - (ENVIRONMENTAL ENDURANCE - TEMPERATURE CYCLE) | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate 1/min. | - |
:
TEL0755-89315823 / 89315866
FAX0755-89315223
www.kaiyuexiang.com
2409272230_KYX-KUS240001820_C18213295.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
