<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
16pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
24MHz
Mfr. Part #:
KSD240001620
Package:
HC-49S-SMD
Key Attributes
Model Number:
KSD240001620
Product Description
Product Overview
This specification document details the HC-49USSMD Quartz Crystal Resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49USSMD/24.000 MHZ
- Original Model: KSD240001620
- Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.
Technical Specifications
| Parameter | Specification | Details |
|---|---|---|
| General | ||
| Holder Type | HC-49USSMD | |
| Mode of Vibration | AT CUT | |
| Oscillation Mode | FUND S&A | |
| Test Facilities | KH-1240 | |
| Storage Temperature | -40 TO +85 | |
| Driver Level | 100W | |
| Electrical Parameter | ||
| Normal Frequency | 24.000 MHz | |
| Frequency Tolerance (252) | 20ppm | |
| Temperature Stability | 20ppm | |
| Operating Temperature Range | -20 TO +70 | |
| Load Capacitance | 16 PF | |
| Motional Capacitance | 5PF MAX | |
| Shunt Capacitance | ||
| Effective Series Resistance | 40 MAX | |
| Insulation Resistance | 500M OHMS MIN AT DC 100V | |
| Mechanical Parameter | ||
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance | *Measurement after 1 hour at room temperature. | |
| Shock Resistance | Electrical characteristics satisfied after dropping 3 times from 50 cm onto hard wooden board. | |
| Vibration Resistance | Electrical characteristics satisfied after supplying vibration: Frequency 10-55Hz, Period 1-2min, Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2 hours/each direction. | |
| Strength of Terminals/Lead-Wires | Pulling Test: Body fixed, 900g tension weight applied axially for 30 sec. No visual damage after test. | Bending Test: Body fixed, 90 bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damage after test. |
| Sealing Tightness | No gas bubble observed after specimen in hot water at +90+95 for 5 min. | |
| Soldering Dip | Terminals/lead-wires dipped into solder at +2305 for 3 sec. Dipping depth 2mm from body bottom. Over 90% coverage on terminals/lead-wires. (After applying ROSIN flux) | |
| Solder Heating Resistance | Electrical characteristics satisfied after dipping terminals/lead-wires into solder at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | |
| Environmental Endurance | *Measurement after 1 hour at room temperature. | |
| Humidity Resistance | Electrical characteristics satisfied after 250 hours at 602, 90-95% humidity. | |
| Storage in Low Temperature | Electrical characteristics satisfied after 250 hours at -302. | |
| Storage in High Temperature | Electrical characteristics satisfied after 250 hours at +852. | |
| Temperature Cycle | Electrical characteristics satisfied after 3 cycles. Temperature shift 1/min (low to high, high to low). |
2409272302_KYX-KSD240001620_C18213249.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
