<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Load Capacitance:
12pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
40Ω
Frequency:
37.5MHz
Mfr. Part #:
KUS375001210
Package:
HC-49S
Key Attributes
Model Number:
KUS375001210
Product Description
49US/37.500MHZ
KUS375001210
12PF/10ppm
- 0755-89315823 / 89315866
- 0755-89315223
- www.kaiyuexiang.com
| 1. GENERAL () | ||
| HOLD TYPE () | 49US | |
| MODE OF VIBRATION () | AT CUT | |
| OSCILLATION MODE () | FUNDAMENTAL | |
| TEST FACILITIES () | S&A KH-1240 | |
| STORAGE TEMPERATURE () | -40 TO +85 | |
| DRIVER LEVEL () | 100W | |
| 2. ELECTRICAL PARAMETER () | ||
| NORMAL FREQUENCY () | 37.500 MHz | |
| FREQUENCY TOLERANCE () (252) | 10ppm | |
| TEMPERATURE STABILITY () | 20ppm | |
| OPERATING TEMPERATURE RANGE () | -20 TO +70 | |
| LOAD CAPACITANCE () | 12 PF | |
| MOTIONAL CAPACITANCE () | 5PF MAX | |
| SHUNT CAPACITANCE () | ||
| EFFECTIVE SERIES RESISTANCE () | 40 MAX | |
| INSULATION RESISTANCE () | 500M OHMS MIN | AT DC 100V |
| 3. MECHANICAL PARAMETER () | ||
| SOLDERABILITY () | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance () | ||
| SHOCK () | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION () | Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction | |
| STRENGTH OF TERMINALS/LEAD-WIRES () | 1. PULLING: 900g tension weight for 30 sec. (no visual damages) 2. BENDING: 90degree bending with 225gs tension weight, then straighten (no visual damages) | |
| SEALING TIGHTNESS () | No gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP () | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body bottom. Soldering portion >90% coverage. | |
| SOLDER HEATING () | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge. Electrical characteristics shall be satisfied. | |
| Environmental Endurance () | ||
| HUMIDITY () | Electrical characteristics shall be satisfied after 250 hours at 602, 9095% humidity. | |
| STORAGE IN LOW TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| STORAGE IN HIGH TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| TEMPERATURE CYCLE () | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate 1/min. | |
2409272230_KYX-KUS375001210_C18213348.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
