<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
60Ω
Frequency:
13.52127MHz
Mfr. Part #:
KBD1352A2030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD1352A2030
Product Description
Product Overview
The HC-49USSMD is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49USSMD
- Original Manufacturer Model: KBD1352A2030
Technical Specifications
| Parameter | Value |
| Normal Frequency | 13.52127 MHz |
| Frequency Tolerance (252) | 30ppm |
| Temperature Stability | 20ppm |
| Operating Temperature Range | -20 TO +70 |
| Load Capacitance | 20 PF |
| Motional Capacitance | 5pF MAX |
| Shunt Capacitance | N/A |
| Effective Series Resistance | 60 MAX |
| Insulation Resistance | 500M OHMS MIN AT DC 100V |
| Holder Type | HC-49USSMD |
| Mode of Vibration | AT CUT |
| Oscillation Mode | FUND S&A |
| Storage Temperature | -40 TO +85 |
| Driver Level | 100W |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. |
| Mechanical Endurance - Vibration | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction. |
| Mechanical Endurance - Strength of Terminals/Lead-Wires (Pulling) | 900g tension weight for 30 sec. No visual damages. |
| Mechanical Endurance - Strength of Terminals/Lead-Wires (Bending) | 90-degree bending with 225g tension weight, then straightened. Repeated in opposite direction. No visual damages. |
| Mechanical Endurance - Sealing Tightness | No gas bubble observed after 5 min in hot water at +90+95. |
| Mechanical Endurance - Soldering Dip | Terminals dipped into solder at +2305 for 3sec, 2mm from body. Over 90% coverage. |
| Mechanical Endurance - Solder Heating | Terminals dipped into solder at +35010 for 3 sec, 2mm from edge. Electrical characteristics shall be satisfied. |
| Environmental Endurance - Humidity | Electrical characteristics shall be satisfied after 250 hours at 602, 9095% humidity. |
| Environmental Endurance - Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. |
| Environmental Endurance - Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. |
| Environmental Endurance - Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift at 1/min. |
2409272303_KYX-KBD1352A2030_C18213368.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
