<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
11pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
60Ω
Frequency:
16MHz
Mfr. Part #:
KUS160001120
Package:
HC-49S
Key Attributes
Model Number:
KUS160001120
Product Description
Product Overview
The HC-49SJJ/16.000MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring stable frequency oscillations.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49SJJ/16.000MHZ
- Original Model: KUS160001120
Technical Specifications
| Specification | Parameter |
| Holder Type | 49US AT CUT |
| Mode of Vibration | FUND S&A KH-1240 |
| Oscillation Mode | -40TO +85 |
| Test Facilities | 100W |
| Storage Temperature | 16.000 MHz |
| Driver Level | 20ppm |
| Normal Frequency | 20ppm |
| Frequency Tolerance252 | -20TO +70 |
| Temperature Stability | 11 PF |
| Operating Temperature Range | 3PF MAX |
| Load Capacitance | 60 MAX |
| Motional Capacitance | 500M OHMS MIN AT DC 100V |
| Shunt Capacitance | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Effective Series Resistance | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour. |
| Insulation Resistance | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board . |
| Solderability | Electrical characteristics shall be satisfied after supplying following Vibration . |
| Shock | 1055Hz |
| Vibration | 12min |
| Strength of Terminals/LeadWires (Pulling) | 1.5mm PP |
| Strength of Terminals/LeadWires (Bending) | X.Y.Z |
| Sealing Tightness | 2hours/each direction |
| Soldering Dip | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec . After above test a), there is no observation of any visual damages on the specimen. |
| Solder Heating | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight . After that, terminals/lead-wires shall be straightened gradually . Then the same bending and straightening shall be supplied to the opposite direction in the same axial . (Refer to Fig-1) b)After above test a), there is no observation of any visual damages on the specimen . |
| Humidity | There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min . |
| Storage in Low Temperature | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec . Dipping depth shall be 2mm from the bottom of specimens body . (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped . |
| Storage in High Temperature | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +1 +35010 for 3 sec . Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires . |
| Temperature Cycle | Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour . |
| Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours . | |
| Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours . | |
| Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours . | |
| Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles) . Temperature shift from low to high, high to low shall be done in 1/min (Refer to Fig-2) . |
2409272230_KYX-KUS160001120_C18213316.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
