<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Load Capacitance:
20pF
Frequency:
11.0592MHz
Mfr. Part #:
KUS1105A2020
Package:
HC-49S
Key Attributes
Model Number:
KUS1105A2020
Product Description
Product Overview
This specification sheet details the HC-49SJJ/11.0592MHZ Quartz Crystal Resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for various electronic applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49SJJ/11.0592MHZ
- Original Manufacturer Model: KUS1105A2020
Technical Specifications
| Section | Parameter | Specification | Details |
| 1. GENERAL | HOLDER TYPE | 49US | |
| MODE OF VIBRATION | AT CUT | ||
| OSCILLATION MODE | FUND S&A KH-1240 | ||
| TEST FACILITIES | |||
| STORAGE TEMPERATURE | -40 TO +85 | ||
| DRIVER LEVEL | 100W | ||
| 2. ELECTRICAL PARAMETER | NORMAL FREQUENCY | 11.0592 MHz | |
| FREQUENCY TOLERANCE252 | 20ppm | ||
| TEMPERATURE STABILITY | 20ppm | ||
| OPERATING TEMPERATURE RANGE | -20 TO +70 | ||
| LOAD CAPACITANCE | 20 PF | ||
| MOTIONAL CAPACITANCE | 3PF MAX | ||
| SHUNT CAPACITANCE | |||
| EFFECTIVE SERIES RESISTANCE | 80 MAX | ||
| INSULATION RESISTANCE | 500M OHMS MIN | AT DC 100V | |
| 3. MECHANICAL PARAMETER | SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| MECHANICAL ENDURANCE - SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | ||
| MECHANICAL ENDURANCE - VIBRATION | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction | ||
| STRENGTH OF TERMINALS/LEADWIRES - PULLING | 900g tension weight for 30 sec. No visual damages. | ||
| STRENGTH OF TERMINALS/LEADWIRES - BENDING | 90-degree bending with 225gs tension weight. No visual damages. | ||
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| SOLDERING DIP | Dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of body. Over 90% coverage. | (After applying ROSIN flux) | |
| SOLDER HEATING | Dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | ||
| ENVIRONMENTAL ENDURANCE | HUMIDITY | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. | |
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | (Refer to Fig-2) |
2409272303_KYX-KUS1105A2020_C19076874.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
