<
>
Specifications
Normal temperature Frequency Tolerance:
±10ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Frequency:
12MHz
Mfr. Part #:
KBD120002010
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD120002010
Product Description
Product Overview
This document details the specifications for the HC-49USSMD Quartz Crystal Resonator from Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.
Product Attributes
- Brand: Kaiyuexiang
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator
- Product Model: HC-49USSMD/12.000 MHZ
- Original Model: KBD120002010
- Technical Department: Dong Zongquan
Technical Specifications
| Parameter | Specification | Unit |
|---|---|---|
| Holder Type | HC-49USSMD | |
| Mode of Vibration | AT CUT | |
| Oscillation Mode | FUND S&A | |
| Driver Level | 100W | |
| Normal Frequency | 12.000 | MHz |
| Frequency Tolerance (252) | 10 | ppm |
| Temperature Stability | 20 | ppm |
| Operating Temperature Range | -20 TO + 70 | |
| Load Capacitance | 20 | PF |
| Motional Capacitance | 3 | PF MAX |
| Shunt Capacitance | ||
| Effective Series Resistance | 80 | MAX |
| Insulation Resistance | 500M OHMS MIN | AT DC 100V |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Shock Test | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction | |
| Strength of Terminals/Lead-wires - Pulling Test | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. | |
| Strength of Terminals/Lead-wires - Bending Test | 90degree bending with 225gs tension weight. No visual damages. | |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| Soldering Dip Test | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90%. | |
| Solder Heating Test | Terminals/lead-wires dipped into solder melted tank at +35010 for 3-4 sec. Electrical characteristics shall be satisfied. | |
| Humidity Test | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| Storage in Low Temperature Test | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| Storage in High Temperature Test | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| Temperature Cycle Test | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift 1/min. |
2409272302_KYX-KBD120002010_C18209140.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
