<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Load Capacitance:
20pF
Frequency:
4.2336MHz
Mfr. Part #:
KBD423362030
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD423362030
Product Description
HC-49USSMD/4.2336 MHZ
KBD423362030
- (Kaiyuexiang)
| GENERAL | |
| HOLDER TYPE | HC-49USSMD |
| MODE OF VIBRATION | AT CUT |
| OSCILLATION MODE | FUND S&A |
| TEST FACILITIES | KH-1240 |
| STORAGE TEMPERATURE | -40TO +85 |
| DRIVER LEVEL | 100W |
| ELECTRICAL PARAMETER | |
| NORMAL FREQUENCY | 4.2336 MHz |
| FREQUENCY TOLERANCE (252) | 30ppm |
| TEMPERATURE STABILITY | 20ppm |
| OPERATING TEMPERATURE RANGE | -20TO + 70 |
| LOAD CAPACITANCE | 20 PF |
| MOTIONAL CAPACITANE | 3PF MAX |
| SHUNT CAPACITANCE | 250MAX |
| EFFECTIVE SERIES RESISTANCE | 500M OHMS MIN |
| INSULATION RESISTANCE | AT DC 100V |
| MECHANICAL PARAMETER | |
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| MECHANICAL ENDURANCE - SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. |
| MECHANICAL ENDURANCE - VIBRATION | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction |
| MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES (PULLING) | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. |
| MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEADWIRES (BENDING) | 90degree bending shall be given, being supplied 225gs tension weight. No visual damages. |
| MECHANICAL ENDURANCE - SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. |
| MECHANICAL ENDURANCE - SOLDERING DIP | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm. Soldering portion over 90%. |
| MECHANICAL ENDURANCE - SOLDER HEATING | Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. |
| ENVIRONMENTAL ENDURANCE - HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. |
| ENVIRONMENTAL ENDURANCE - STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. |
| ENVIRONMENTAL ENDURANCE - STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. |
| ENVIRONMENTAL ENDURANCE - TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift 1/min. |
2409272303_KYX-KBD423362030_C19076807.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
