<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Load Capacitance:
20pF
Frequency:
24.576MHz
Mfr. Part #:
KUS245762030
Package:
HC-49S
Key Attributes
Model Number:
KUS245762030
Product Description
- 49US/24.576MHZ
49US/24.576MHZ49US24.576MHz20PF30ppm
- : (Kaiyuexiang)
- :
- :
- : 49US/24.576MHZ
- : KUS245762030
| 1. GENERAL () | ||
| HOLDER TYPE () | 49US | |
| MODE OF VIBRATION () | AT CUT | |
| OSCILLATION MODE () | FUND S&A | |
| TEST FACILITIES () | KH-1240 | |
| STORAGE TEMPERATURE () | -40 TO +85 | |
| DRIVER LEVEL () | 100W | |
| 2. ELECTRICAL PARAMETER () | ||
| NORMAL FREQUENCY () | 24.576 MHz | |
| FREQUENCY TOLERANCE (252) () | 30ppm | |
| TEMPERATURE STABILITY () | 20ppm | |
| OPERATING TEMPERATURE RANGE () | -20 TO +70 | |
| LOAD CAPACITANCE () | 20 PF | |
| MOTIONAL CAPACITANCE () | 5PF MAX | |
| SHUNT CAPACITANCE () | ||
| EFFECTIVE SERIES RESISTANCE () | 40 MAX | |
| INSULATION RESISTANCE () | 500M OHMS MIN | AT DC 100V |
| 3. MECHANICAL PARAMETER () | ||
| SOLDERABILITY () | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance () | ||
| SHOCK () | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION () | Electrical characteristics shall be satisfied after supplying following Vibration. (VIBRATION FREQUENCY: 1055Hz, REPEATED PERIOD: 12min, FULL CYCLE: 1.5mm PP, DIRECTION: X.Y.Z, TIME: 2hours/each direction) | |
| STRENGTH OF TERMINALS/LEADWIRES () | PULLING () | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. |
| BENDING () | Body fixed, 90degree bending with 225gs tension weight, then straightened. Repeated in opposite direction. No visual damages. | |
| SEALING TIGHTNESS () | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| SOLDERING DIP () | Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body bottom. Over 90% coverage. | |
| SOLDER HEATING () | Terminals/lead-wires dipped into solder at +35010 for 3 sec. Electrical characteristics shall be satisfied. | |
| ENVIRONMENTAL ENDURANCE () | ||
| HUMIDITY () | Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity. | |
| STORAGE IN LOW TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at -302. | |
| STORAGE IN HIGH TEMPERATURE () | Electrical characteristics shall be satisfied after 250 hours at +852. | |
| TEMPERATURE CYCLE () | Electrical characteristics shall be satisfied after 3 cycles. Temp shift 1/min. | |
2409272230_KYX-KUS245762030_C19076835.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
