<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Load Capacitance:
20pF
Frequency:
19.6608MHz
Mfr. Part #:
KUS1966A2020
Package:
HC-49S
Key Attributes
Model Number:
KUS1966A2020
Product Description
49US/19.6608MHZ
- : (Kaiyuexiang)
- :
- :
- : 49US/19.6608MHZ
- : KUS1966A2020
| (Normal Frequency) | 19.6608 | MHz | |
| (Frequency Tolerance) | ±20 | ppm | @ 25±2 |
| (Temperature Stability) | ±20 | ppm | |
| (Operating Temperature Range) | -20 to +70 | ||
| (Load Capacitance) | 20 | PF | |
| (Shunt Capacitance) | 5 | MAX | PF |
| (Effective Series Resistance) | 60 | MAX | Ω |
| (Insulation Resistance) | 500 | MIN | MΩ @ DC 100V |
| (Driver Level) | 100 | μW | |
| (Mode of Vibration) | FUND | AT CUT | |
| (Oscillation Mode) | S&A | ||
| (Storage Temperature) | -40 to +85 | ||
| (Solderability) | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 Flux for 5 sec. | ||
| - (Strength of Terminals/Lead-wires - Pulling) | 900 | g | For 30 sec. |
| - (Strength of Terminals/Lead-wires - Bending) | 225 | gs | 90 degree bending |
| (Sealing Tightness) | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| (Soldering Dip) | Terminals/lead-wires dipped into solder melted tank at +230±5 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | ||
| (Solder Heating) | Terminals/lead-wires dipped into solder melted tank at +350±10 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires. | ||
| (Humidity) | Electrical characteristics shall be satisfied after letting it alone at 60±2 in humidity of 9095% for 250 hours. | ||
| (Storage in Low Temperature) | Electrical characteristics shall be satisfied after letting it alone at -30±2 for 250 hours. | ||
| (Storage in High Temperature) | Electrical characteristics shall be satisfied after letting it alone at +85±2 for 250 hours. | ||
| (Temperature Cycle) | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min. | (Refer to Fig-2) |
2409272230_KYX-KUS1966A2020_C19076839.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
