<
>
Specifications
Normal temperature Frequency Tolerance:
±30ppm
Load Capacitance:
20pF
Frequency:
13.56MHz
Mfr. Part #:
KSS135602030
Package:
HC-49S
Key Attributes
Model Number:
KSS135602030
Product Description
- 49USS/13.560MHZ
49USS/13.560MHZ
- : (Kaiyuexiang)
- :
- : www.kaiyuexiang.com
- : KSS135602030
| PRODUCT NAME | QUARTZ CRYSTAL RESONATOR | ||
| 49USS/13.560MHZ | PRODUCT MODEL | 49USS/13.560MHZ | |
| 13.560 MHz | NORMAL FREQUENCY | 13.560 MHz | |
| (252) | 30ppm | FREQUENCY TOLERANCE (252) | 30ppm |
| 20ppm | TEMPERATURE STABILITY | 20ppm | |
| -20 TO +70 | OPERATING TEMPERATURE RANGE | -20 TO +70 | |
| 20 PF | LOAD CAPACITANCE | 20 PF | |
| 5PF MAX | SHUNT CAPACITANCE | 5PF MAX | |
| 60 MAX | EFFECTIVE SERIES RESISTANCE | 60 MAX | |
| 500M OHMS MIN AT DC 100V | INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| FUND S&A | MODE OF VIBRATION | FUND S&A | |
| KH-1240 | OSCILLATION MODE | KH-1240 | |
| 100W | DRIVER LEVEL | 100W | |
| -40 TO +85 | STORAGE TEMPERATURE | -40 TO +85 | |
| 95%90/102455ALPHA 6115 | SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| - | 900g30 | STRENGTH OF TERMINALS/LEADWIRES - PULLING | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test, there is no observation of any visual damages on the specimen. |
| - | 90225g | STRENGTH OF TERMINALS/LEADWIRES - BENDING | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test, there is no observation of any visual damages on the specimen. |
| +90+955 | SEALING TIGHTNESS | There is no observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| +230532mm90% | SOLDERING DIP | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | |
| +350103-4 | SOLDER HEATING | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires. | |
| 60290-95%250 | HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| -302250 | STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| +852250 | STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| 31/min | TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. |
2409272230_KYX-KSS135602030_C19076870.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
