<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Load Capacitance:
12pF
Operating Temperature:
-20℃~+70℃
Equivalent Series Resistance(ESR):
250Ω
Frequency:
8MHz
Mfr. Part #:
KUS080001220
Package:
HC-49S
Key Attributes
Model Number:
KUS080001220
Product Description
(HC-49SJJ/8.000MHZ)
HC-49SJJ/8.000MHZ
- : (Kaiyuexiang)
- :
- :
- : HC-49SJJ/8.000MHZ
- : KUS080001220
| Holder Type | 49US AT CUT | |
| Mode of Vibration | FUND | |
| Oscillation Mode | S&A | |
| Test Facilities | KH-1240 | |
| Storage Temperature | -40 TO +85 | |
| Driver Level | 100W | |
| Normal Frequency | 8.000 MHz | |
| Frequency Tolerance (252) | 20ppm | |
| Temperature Stability | 20ppm | |
| Operating Temperature Range | -20 TO +70 | |
| Load Capacitance | 12 PF | |
| Motional Capacitance | 3PF MAX | |
| Shunt Capacitance | 250 MAX | |
| Effective Series Resistance | 500M OHMS MIN | |
| Insulation Resistance | AT DC 100V | |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| Mechanical Endurance - Vibration | Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied after supplying following Vibration. | |
| Mechanical Endurance - Strength of Terminals/Lead-wires (Pulling) | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test. | |
| Mechanical Endurance - Strength of Terminals/Lead-wires (Bending) | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages after test. | |
| Mechanical Endurance - Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | |
| Mechanical Endurance - Soldering Dip | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | |
| Mechanical Endurance - Solder Heating | Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires. | |
| Humidity | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | |
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | |
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | |
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. |
2409272230_KYX-KUS080001220_C18213279.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
