<
>
Specifications
Normal temperature Frequency Tolerance:
±20ppm
Frequency Stability:
±20ppm
Operating Temperature:
-20℃~+70℃
Load Capacitance:
20pF
Equivalent Series Resistance(ESR):
40Ω
Frequency:
30MHz
Mfr. Part #:
KBD300002020
Package:
HC-49S-SMD
Key Attributes
Model Number:
KBD300002020
Product Description
Product Overview
The Kaiyuexiang Industrial Quartz Crystal Resonator, model 49USSMD/30.000MHZ, is a high-precision electronic component designed for oscillation applications. It features a frequency of 30.000MHz with a frequency tolerance of 10ppm and a temperature stability of 20ppm. This SMD (Surface Mount Device) component is suitable for a wide range of electronic circuits requiring stable and accurate frequency generation.
Product Attributes
- Brand: (Kaiyuexiang Industrial)
- Origin: Shenzhen, China
- Product Name: (Quartz Crystal Resonator)
- Product Model: 49USSMD/30.000MHZ
- Original Manufacturer Model: KBD300002020
Technical Specifications
| Parameter | Specification |
| Normal Frequency | 30.000MHz |
| Frequency Tolerance (252) | 10ppm |
| Temperature Stability | 20ppm |
| Operating Temperature Range | -20 TO +70 |
| Load Capacitance | 20PF |
| Motional Capacitance | 7PF MAX |
| Shunt Capacitance | 40MAX |
| Effective Series Resistance | 500M OHMS MIN AT DC 100V |
| Insulation Resistance | AT DC 100V |
| Holder Type | 49USSMD |
| Mode of Vibration | AT CUT |
| Oscillation Mode | FUND S&A |
| Test Facilities | KH-1240 |
| Storage Temperature | -40 TO +85 |
| Driver Level | 100W |
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. |
| Shock Test | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. |
| Vibration Test | Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied. |
| Strength of Terminals/Lead-wires (Pulling) | 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. |
| Strength of Terminals/Lead-wires (Bending) | 90 bending with 225g tension weight, then straightened. Repeated to opposite direction. No visual damages. |
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. |
| Soldering Dip | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of body. Soldering portion over 90%. |
| Solder Heating | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. |
| Humidity Test | Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity. |
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. |
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. |
| Temperature Cycle Test | Electrical characteristics shall be satisfied after 3 cycles with temperature shift rate of 1/min. |
2409272303_KYX-KBD300002020_C2835979.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
