<
>
Specifications
Capacitance:
15nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
630V
Mfr. Part #:
MMKP153J2J1001
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MMKP153J2J1001
Product Description
Product Overview
The MMKP82 Double sided metallized polypropylene film capacitor (Box-type) is designed for high voltage, high frequency, and pulse circuits. It features a double-sided metallized polypropylene structure with low loss, small internal temperature rise, and a negative temperature coefficient of capacitance. Its excellent flame-resistant properties make it suitable for electronic ballasts, compact lamps, and SNUBBER and SCR commutating circuits. The capacitor utilizes a polypropylene film dielectric and double-sided metallized polyester film electrodes, with a non-inductive configuration and tin-plated copper leads, sealed with flame-retardant epoxy resin.
Product Attributes
- Brand: Keya ()
- Origin: Dongguan, China
- Product Type: Plastic case double-sided metallized polypropylene film capacitor
- Model Series: MMKP82
- Housing Color: Grey ()
Technical Specifications
| Item | Performance Requirement | Test Method | Details |
|---|---|---|---|
| Applicable Temperature Range | -40 +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.00221.8 F | ||
| Capacitance Tolerance | 2%(G), 3%(H), 5%(J), 10%(K) | Ref. item 4.2.2 | 1kHz |
| Dissipation Factor (tg) | 0.0010 | Ref. item 4.2.3 | (20, 1KHz, 0.1V) |
| Dielectric Strength | 1.6UR, 5s No breakdown or arcing | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | 50000M, CN0.33 F; IR30000, CN>0.33 F | Ref. item 4.2.4 | (100V, 20, 1min) |
| Solderability | Good tin plating | Ref. item 4.5 | Soldering bath method Ta, Method 1. Solder temp: 2352, Immersion time: 2.00.5s |
| Lead Strength (Tensile) | 0.5 d0.8mm, 10N; 1.0 d1.2mm, 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5 d0.8mm, 5N; 1.0 d1.2mm, 10N | Ref. item 4.3 | Two consecutive bends in each direction |
| Resistance to Soldering Heat | No visible damage, clear marking | Ref. item 4.4 | Soldering bath method Tb, Method 1A. 2605, 101s |
| Rapid Change of Temperature | Appearance: No visible damage, clear marking. Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz, C1.0 F), tg 0.0020 (1kHz, C>1 F). IR: 50% of rated value. | Ref. item 4.6 | QA=-40, QB=+105. 5 cycles, duration: t=30min. |
| Climatic Sequence | Appearance: No visible damage, clear marking. Capacitance change: C/C3% of initial measurement. tg increase: tg 0.0030 (10kHz, C1.0 F), tg 0.0030 (1kHz, C>1 F). IR: 50% of rated value. | Ref. item 4.10.2, 4.10.3, 4.10.4, 4.10.6 | Includes Dry Heat, Cyclic Damp Heat, Cold. Apply UR for 1 min after test. |
| Steady State Damp Heat | Appearance: No obvious bulging, clear marking. Capacitance change: C/C2% of initial measurement. tg increase: tg 0.0010 (1kHz). IR: 90% of rated value. | Ref. item 4.11 | Temperature: 85, Humidity: 85%RH, Duration: 48H |
| Endurance | Appearance: No visible damage, clear marking. Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz). IR: 50% of rated value. | Ref. item 4.12 | +85, 1000h. Applied voltage: 1.25 times rated voltage. |
| Characteristic Dependent on Temperature | Capacitance measurement at points b, d, f. At lower category temperature -40: 0(Cb-Cd)/Cd+3%. At upper category temperature 110: -4%(Cf-Cd)/Cd0. | Ref. item 4.2.6 | Charging voltage is rated voltage. Static method, capacitor held at each temp sequentially. |
| Charge and Discharge | Capacitance change: C/C5% of initial measurement. tg increase: tg 0.0030 (10KHz, 0.1V). Dielectric Strength: 1.6UR. IR: 50% of rated value. Appearance: No explosion, no burning. | Ref. item 4.13 | Cycles: 10000. Charging time: 0.5s. Discharging time: 0.5s. Charging voltage is rated voltage. |
| Pulse Voltage | C/C5% of initial measurement. tg increase: tg 0.0020 (10kHz). IR: 50% of rated value. Dielectric Strength: 1.6UR. | Cycles: 24. Pulse voltage: 1.8UR. | |
| Ripple Current | Appearance: No explosion, no burning. Capacitance change: C/C10% of initial measurement. tg increase: tg 0.0030(10kHz, 0.1V), tg 0.0030(1kHz, 1V). IR: 50% of rated value. Dielectric Strength: 1.6UR. | Test temp: Room temp. Ripple current: 10A. DC bias = rated voltage - ripple voltage. Test time: 5 hours. Test frequency: 100KHZ. | |
| Flame Retardancy Test | After removing from flame, any capacitor shall not continue to burn for more than 30S, and the drippings from the capacitor shall not ignite the cotton paper laid beneath it. | IEC695-2-2 Needle Flame Test, Flammability Class C, exposed to flame once. | Exposure time depends on capacitor volume (mm): V250 (5S), 250 |
2411211936_KYET-MMKP153J2J1001_C2991060.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
