<
>
Specifications
Capacitance:
220nF
Operating Temperature:
-40℃~+100℃
Tolerance:
±5%
Voltage Rating:
400V
Mfr. Part #:
KP224J2G1501
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
KP224J2G1501
Product Description
Product Overview
This specification document details the Metallized Polypropylene Film Capacitor (MPP/MPR/CBB21/CBB22) from Dongguan City Keya Electronics Technology Co., Ltd. These capacitors are designed for general-purpose use and are suitable for applications where reliable capacitance and voltage ratings are required. The document outlines the product's construction, electrical characteristics, mechanical properties, and endurance specifications.
Product Attributes
- Brand: CHIEFCON ()
- Origin: Dongguan City, Guangdong Province, China
- Manufacturer: Dongguan City Keya Electronics Technology Co., Ltd. ()
- Material: Metallized Polypropylene Film
- Certifications: UL V-0 (for Epoxy Resin and Plastic Case)
Technical Specifications
| CHIEFCON P/N | CUSTOMER P/N | CAP. (uF) | Tol. % | R.V. (VDC) | Dimensions (mm) W1 | Dimensions (mm) H1 | Dimensions (mm) T1 | Dimensions (mm) P0.5 | Dimensions (mm) d0.05 | Dimensions (mm) L min | Marking Symbol |
| KP224J2G1501 | 0.22 | 5% | 400 | 17 | 10 | 5.5 | 15 | 0.6 | 15 | 224 |
| ITEM | DESCRIPTION | SPECIFICATION |
| SCOPE | Applicable to KYET Metallized Polypropylene Film Capacitors (MPP/MPR/CBB21/CBB22) | |
| STANDARD ATMOSPHERIC CONDITIONS FOR MEASUREMENTS | Ambient Temperature | 15 to 35 (+20 5 for doubt) |
| Relative Humidity | 45% to 75% (60% to 70% for doubt) | |
| Air Pressure | 86 kpa to 106 kpa | |
| OPERATING TEMPERATURE RANGE | -40 to +100 at rated voltage | |
| CONSTRUCTION | Dielectric | Metallized Polypropylene Film |
| Metal Spray | Special Solder | |
| Lead Wire | Tinned Copper-clad Steel Wire | |
| Epoxy Resin | UL V-0 Flame Retardant | |
| Plastic Case | UL V-0 Flame Retardant | |
| MARKING | Manufacturer's Symbol | KYET ELECTRONICS CO., LTD |
| Type or Material | MPP (Metallized Polypropylene Film) | |
| Capacitor Class | CBB22 | |
| Nominal Capacitance | Expressed in 3-digit EIA code | |
| Tolerance | J (5%), K (10%), M (20%) | |
| Rated Voltage | 100, 250, 400, 450, 630 VDC | |
| Operating Temperature Range | -40100 | |
| Dissipation Factor (DF) Max | 0.1% (at 1KHz, 25) | |
| Insulation Resistance (IR) | CR0.33F: 10000M; CR0.33F: 5000M/F (UR100V) | |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals) | 1.5*Ur (DC) for 60 sec (no abnormality) |
| Withstand Voltage (Between Terminals & Enclosure) | 2*Ur + 500V for 2 to 5 sec. Min. 1,000VDC | |
| Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | |
| Capacitance (CAP) | Within specified tolerance at +20 5 | |
| Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) at 100 VDC for 605 sec. | |
| MECHANICAL CHARACTERISTICS | Terminal Strength (Tensile Strength) | Apply 1.0Kg for 10 1 sec. in axial direction (no abnormality) |
| ENDURANCE CHARACTERISTICS | Temperature Cycle | 5 cycles: +20 (3m) -40 (10m) +20 (3m) +100 (10m) +20 (3m). After test, rest 1.5 hrs. at room temp. |
| Capacitance Change Rate (Temp. Cycle) | Within 5% | |
| Dissipation Factor (Temp. Cycle) | 0.002 (0.2%) at 1KHz | |
| Insulation Resistance (Temp. Cycle) | 50% of the limit value in NO.5.4 | |
| Dry Heat Resistance | +100 2 for 16 1 hrs. | |
| Capacitance Change Rate (Dry Heat) | Within 5% | |
| Dissipation Factor (Dry Heat) | 0.002 (0.2%) at 1KHz | |
| Insulation Resistance (Dry Heat) | 50% of the limit value in NO.5.4 | |
| Cold Resistance | -40 3 for 2 1 hrs. | |
| Capacitance Change Rate (Cold) | Within 5% | |
| Dissipation Factor (Cold) | 0.002 (0.2%) at 1KHz | |
| Insulation Resistance (Cold) | 50% of the limit value in NO.5.4 | |
| Damp Heat | +40 2, 90-95 RH for 2 1 hrs. After test, rest 1.5 hrs. at room temp. |
2410121236_KYET-KP224J2G1501_C390144.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
