<
>
Specifications
Capacitance:
1uF
Operating Temperature:
-40℃~+100℃
Tolerance:
±10%
Voltage Rating:
1.2kV
Mfr. Part #:
KP105K3L2701
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
KP105K3L2701
Product Description
Product Overview
This specification applies to KYET Metallized Polypropylene Film capacitors (MPP/CBB81/CBB21/CBB22). These capacitors utilize an organic film as a dielectric, and when subjected to over-voltage or over-current, may generate flame and become damaged. Therefore, they must be used within their rated specifications and in correct circuit conditions. The product is designed for applications requiring stable capacitance and reliable performance across a wide temperature range.
Product Attributes
- Brand: (KYET ELECTRONICS CO., LTD)
- Origin: (Dongguan City)
- Material: (Metallized Polypropylene Film)
- Certifications: UL V-0 (Epoxy Resin, Plastic Case)
Technical Specifications
| Item | Description | Details |
| Scope | Specification Applicability | KYET Metallized Polypropylene Film capacitor (MPP/CBB81/CBB21/CBB22) |
| Standard Atmospheric Conditions | Ambient Temperature | 15 to 35 (20 5 for doubt) |
| Standard Atmospheric Conditions | Relative Humidity | 45% to 75% (60% to 70% for doubt) |
| Standard Atmospheric Conditions | Air Pressure | 86 kpa to 106 kpa |
| Operating Temperature Range | Continuous Operation | -40 to +100 at rated voltage |
| Construction | Dielectric | Metallized Polypropylene Film |
| Construction | Metal Spray | Special Solder |
| Construction | Lead Wire | Copper-clad Steel Wire (Tinned) |
| Construction | Epoxy Resin | UL V-0 Flame Retardant Grade |
| Construction | Plastic Case | UL V-0 Flame Retardant Grade |
| Marking | Manufacturer Symbol | KYET ELECTRONICS CO., LTD |
| Marking | Type or Material | MPP (Metallized Polypropylene Film) |
| Marking | Capacitor Class | CBB22 |
| Marking | Nominal Capacitance | Expressed in 3-digit (EIA) code |
| Marking | Tolerance | J (5%), K (10%), M (20%) |
| Marking | Rated Voltage | 100, 250, 400, 450, 630, 1000, 1250, 1600, 2000VDC |
| Marking | Operating Temperature Range | -40100 |
| Marking | Dissipation Factor (tan) | Max 0.1% (at 1KHz, 25) |
| Marking | Insulation Resistance (IR) | CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V) |
| Electrical Characteristics | Withstand Voltage (TV) - Between Terminals | 1.5*Ur (DC) for 60 sec. (No abnormality) |
| Electrical Characteristics | Withstand Voltage (TV) - Between Terminals & Enclosure | 2*Ur+500V for 2 to 5 sec. Min. 1000VDC (No abnormality) |
| Electrical Characteristics | Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) |
| Electrical Characteristics | Capacitance (CAP) | Within tolerance specified (at +20 5) (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) |
| Electrical Characteristics | Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) (Vt=100 VDC, Charge Time: 605 sec.) |
| Electrical Characteristics | Soldering Property | >90% of circumferential surface of lead wire covered with solder. (Soldering temp: +260 5, Immersion: 2 0.5 sec.) |
| Mechanical Characteristics | Terminal Strength (Tensile Strength) | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction. (No abnormality) |
| Endurance Characteristics | Temperature Cycle | 5 cycles: +20(3m) -40(10m) +20(3m) +100(10m) +20(3m). After test: 1.5 0.5 Hrs. at ordinary condition. |
| Endurance Characteristics | Temperature Cycle - Appearance | Shall be no remarkable change |
| Endurance Characteristics | Temperature Cycle - Withstand Voltage | Shall satisfy NO.5.1 |
| Endurance Characteristics | Temperature Cycle - Capacitance Change Rate | Within 5% of the value before test |
| Endurance Characteristics | Temperature Cycle - Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Endurance Characteristics | Temperature Cycle - Insulation Resistance | 50% of the limit value of NO.5.4 |
| Endurance Characteristics | Dry Heat Resistance | Test Temp: +100 2, Duration: 16 1 hrs. |
| Endurance Characteristics | Dry Heat Resistance - Appearance | Shall be no remarkable change |
| Endurance Characteristics | Dry Heat Resistance - Withstand Voltage | Shall satisfy NO.5.1 |
| Endurance Characteristics | Dry Heat Resistance - Capacitance Change Rate | Within 5% of the value before test |
| Endurance Characteristics | Dry Heat Resistance - Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Endurance Characteristics | Dry Heat Resistance - Insulation Resistance | 50% of the limit value of NO.5.4 |
| Endurance Characteristics | Cold Resistance | Test Temp: -40 3, Duration: 2 1 hrs. |
| Endurance Characteristics | Cold Resistance - Appearance | Shall be no remarkable change |
| Endurance Characteristics | Cold Resistance - Withstand Voltage | Shall satisfy NO.5.1 |
| Endurance Characteristics | Cold Resistance - Capacitance Change Rate | Within 5% of the value before test |
| Endurance Characteristics | Cold Resistance - Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
| Endurance Characteristics | Cold Resistance - Insulation Resistance | 50% of the limit value of NO.5.4 |
| Endurance Characteristics | Damp Heat | Test Temp: +40 2, Humidity: 90% to 95% R.H., Duration: 2 1 hrs. After test: 1.5 0.5 Hrs. at ordinary condition. |
| Endurance Characteristics | Damp Heat - Appearance | Shall be no remarkable change |
| Endurance Characteristics | Damp Heat - Withstand Voltage | Shall satisfy NO.5.1 |
| Endurance Characteristics | Damp Heat - Capacitance Change Rate | Within 5% of the value before test |
| Endurance Characteristics | Damp Heat - Dissipation Factor | 0.002 (0.2%) max. @ 1KHz |
2409272230_KYET-KP105K3L2701_C3019085.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
