<
>
Specifications
Capacitance:
82nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
MMKP823J3A1501
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MMKP823J3A1501
Product Description
Dongguan Keya Electronic Technology Co., LTD.
Product: MMKP82 Double sided metallized polypropylene film capacitor (Box-type)
Description: This capacitor utilizes a double-sided metallized polypropylene film dielectric with a polyester film electrode. It features a non-inductive configuration with spray-metal formed terminals and tin-plated copper leads. The capacitor is sealed with flame-retardant epoxy resin.
Features:
- Double-sided metallized polypropylene structure
- Low loss and small inherent temperature rise
- Negative temperature coefficient of capacitance
- Excellent active and passive flame resistant circuit
Typical Applications:
- High voltage, high frequency, and pulse circuits
- Lamp capacitor for electronic ballasts and compact lamps
- Snubber and SCR commutating circuits
Product Attributes:
- Brand: KYET
- Origin: Dongguan, China
- Material: Polypropylene film dielectric, Polyester film electrode, Tin-plated copper leads, Flame-retardant epoxy resin sealing
- Color: Grey casing ()
Technical Specifications
| Item | Performance Requirement | Test Method | Specifications |
|---|---|---|---|
| Applicable Temperature Range | -40 ~ +105 | GB/T 10190 (IEC 60384-16) | |
| Rated Voltage (UR) | 400VDC/630VDC/1000VDC/1250VDC/1600VDC/2000VDC/3000VDC | ||
| Capacitance Range | 0.0022 ~ 1.8F | ||
| Capacitance Tolerance | Ref. item 4.2.2 | 2%(G), 3%(H), 5%(J), 10%(K) | |
| Dissipation Factor (tg) | 0.0010 (20, 1KHz, 0.1V) | Ref. item 4.2.3 | |
| Withstand Voltage | 1.6UR, 5s (no breakdown or arcing) | Ref. item 4.2.1 | |
| Insulation Resistance (IR) | IR50000MF (CN0.33F); IR30000MF (CN>0.33F) (100V, 20, 1min) | Ref. item 4.2.4 | |
| Solderability | Good tin plating | Soldering bath method Tb, Method 1A (leakage current set to 20mA) | Solder temperature: 2352, Immersion time: 2.00.5s |
| Lead Strength (Tensile) | 0.5d0.8mm: 10N; 1.0d1.2mm: 20N | Ref. item 4.3 | |
| Lead Strength (Bending) | 0.5d0.8mm: 5N; 1.0d1.2mm: 10N (two consecutive bends in each direction) | Ref. item 4.3 | |
| Resistance to Soldering Heat | No visible damage, clear marking | Soldering bath method Tb, Method 1A (2605, 101s) | |
| Rapid Change of Temperature | No visible damage, clear marking | Ref. item 4.6 (5 cycles: -40 to +105, 30min each) | Capacitance change: 5%; tg increase: 0.0020 (10kHz, C1.0F) / 0.0020 (1kHz, C>1F); IR: 50% of rated |
| Climatic Sequence | No visible damage, clear marking | Ref. item 4.10 | Capacitance change: 3%; tg increase: 0.0030 (10kHz, C1.0F) / 0.0030 (1kHz, C>1F); IR: 50% of rated |
| Damp Heat (Steady State) | No obvious bulging, clear marking | Ref. item 4.11 (85, 85%RH, 48H) | Capacitance change: 2%; tg increase: 0.0010 (1kHz); IR: 90% of rated |
| Endurance | No visible damage, clear marking | Ref. item 4.12 (+85, 1000h, 1.25x rated voltage) | Capacitance change: 5%; tg increase: 0.0020 (10kHz); IR: 50% of rated |
| Characteristics with Temperature | Ref. item 4.2.6 | At -40: 0 (Cb-Cd)/Cd +3%; At 110: -4% (Cf-Cd)/Cd 0 | |
| Charge and Discharge | No cracking, no burning | Ref. item 4.13 (10000 cycles) | Capacitance change: 5%; tg increase: 0.0030 (10KHz); Withstand Voltage: 1.6UR; IR: 50% of rated |
| Pulse Voltage | No cracking, no burning | 24 cycles (1.8UR) | Capacitance change: 5%; tg increase: 0.0020 (10kHz); IR: 50% of rated; Withstand Voltage: 1.6UR |
| Ripple Current | No cracking, no burning | 5 hours (10A at 100KHZ, DC bias = UR - ripple voltage) | Capacitance change: 10%; tg increase: 0.0030 (10kHz, 0.1V) / 0.0030 (1kHz, 1V); IR: 50% of rated; Withstand Voltage: 1.6UR |
| Flame Retardancy | IEC695-2-2 Needle Flame Test, Category C | After removing flame, continuous burning time 30S, drippings should not ignite cotton paper below. Exposure time varies with volume. |
2411151906_KYET-MMKP823J3A1501_C2991079.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
