<
>
Specifications
Capacitance:
220nF
Operating Temperature:
-40℃~+100℃
Tolerance:
±5%
Voltage Rating:
400V
Mfr. Part #:
KP224J2G1018
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
KP224J2G1018
Product Description
Product Overview
The CHIEFCON KP224J2G1018 is a Metallized Polypropylene Film Capacitor (MPP/CBB22) designed for reliable performance in various electronic circuits. It features a robust construction with a metallized polypropylene dielectric, special solder spray, copper-clad steel wire leads, and an epoxy resin encapsulation within a UL V-0 rated plastic case. This capacitor is suitable for applications requiring stable capacitance and low dissipation factor.
Product Attributes
- Brand: CHIEFCON
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: UL V-0 (for Epoxy Resin and Plastic Case)
Technical Specifications
| CHIEFCON P/N | Customer P/N | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dimensions (mm) W1 | Dimensions (mm) H1 | Dimensions (mm) T1 | Lead Pitch (mm) 0.5 | Wire Diameter (mm) 0.05 | Lead Length (mm) min | Marking |
| KP224J2G1018 | 0.22 | 5% | 400 | 12 | 10.5 | 5.5 | 10 | 0.6 | 15 | 224 5 400 J |
| Item | Description | Conditions | |||||||
| Scope | This specification applies to KYET Metallized Polypropylene Film Capacitors (MPP/MPR/CBB21/CBB22). | ||||||||
| Standard Atmospheric Conditions for Measurements | Ambient Temperature: 15 to 35 (or +20 5 if in doubt) | Relative Humidity: 45% to 75% (or 60% to 70% if in doubt) | Air Pressure: 86 kpa to 106 kpa | ||||||
| Operating Temperature Range | -40 to +100 | Capacitor can be operated continuously at rated voltage. | |||||||
| Construction | Dielectric: Metallized Polypropylene Film | Metal Spray: Special Solder | Lead Wire: Copper-clad Steel Wire | Epoxy Resin: UL V-0 Flame Retardant | Plastic Case: UL V-0 Flame Retardant | ||||
| Marking | Manufacturer Symbol (KYET ELECTRONICS CO., LTD) | Type/Material (MPP for Metallized Polypropylene) | Capacitor Class (CBB22) | Nominal Capacitance (EIA 3-digit code) | Tolerance (J=5%, K=10%, M=20%) | Rated Voltage (100, 250, 400, 450, 630 VDC) | Operating Temperature Range (-40100) | Dissipation Factor (Max 0.1% at 1KHz, 25) | Insulation Resistance (CR0.33F: IR10000M; CR0.33F: IR5000M/F at UR100V) |
| Electrical Characteristics: Withstand Voltage (TV) | Between Terminals: Apply 1.5*Ur (DC) for 60 sec. No abnormality. | Between Terminals & Enclosure: Apply 2*Ur+500V for 2 to 5 sec. Min. 1,000VDC. No abnormality. | |||||||
| Electrical Characteristics: Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | |||||||
| Electrical Characteristics: Capacitance (CAP) | Within the tolerance specified. | Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. at +20 5. | |||||||
| Electrical Characteristics: Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf) | 5,000 Mohm*uF/C (C>0.33uf) | Test Voltage: 100 VDC; Charge Time: 605 sec. | ||||||
| Mechanical Characteristics: Terminal Strength | Tensile Strength: Apply 1.0Kg for 10 1 sec. in the axial direction. No abnormality. | ||||||||
| Endurance Characteristics: Temperature Cycle | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature Cycle: Total 5 cycles (e.g., -40 to +100). After test, allow 1.5 0.5 Hrs. at ordinary condition before measurements. | |||||||
| Endurance Characteristics: Dry Heat Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature: +100 2. Test Duration: 16 + 1/-0 hrs. | |||||||
| Endurance Characteristics: Cold Resistance | Appearance: No remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | Test Temperature: -40 3. Test Duration: 2 1 hrs. | |||||||
| Endurance Characteristics: Damp Heat | Appearance: No remarkable change. | Test Temperature: +40 2. Test Humidity: 90% to 95% R.H. Test Duration: 2 1 hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition before measurements. |
2504101957_KYET-KP224J2G1018_C390139.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
