<
>
Specifications
Capacitance:
180nF
Ratings:
X2
Voltage(AC):
350V
Tolerance:
±10%
Mfr. Part #:
PX184K2H1502
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
PX184K2H1502
Product Description
Product Overview
The KYET MKP-X2 is a metallized polypropylene film AC capacitor designed for suppressing electromagnetic interference in power supplies. It is suitable for applications requiring reliable performance and safety, with a V-0 flame retardant rating for its plastic case and epoxy resin.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: cULus / ENEC / CQC
Technical Specifications
| KYET P/N | CUSTOMER P/N | CAP. (F) | Tol. % | R.V. (VAC) | W (mm) | H (mm) | T (mm) | P (mm) | d (mm) | L (mm) | Test Voltage VDC | Type | Product Code |
| PX184K2H1502 | X2-RC 184K350VAC P15 | 0.18 | 10 | 350VAC | 18 | 12 | 6 | 15 | 0.8 | 20 | 1200 | MKP-X2 | PX184K2H1502 |
| ITEM | DESCRIPTION | SPECIFICATIONS |
| SCOPE | This specification covers KYET Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2). | |
| STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS | AMBIENT TEMPERATURE | 15 to 35 (If there is any doubt on the results, the measurements shall be made at +20 5) |
| RELATIVE HUMIDITY (R.H.) | 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%) | |
| AIR PRESSURE | 86 kpa to 106 kpa | |
| OPERATING TEMPERATURE RANGE | -40 to +110 for which the capacitor can be operated continuously at rated voltage. | |
| CONSTRUCTION | DIELECTRIC | Metallized Polypropylene Film |
| METAL SPRAY | Special Solder (Zinc-Tin Alloy) | |
| LEAD WIRE | Copper-clad Steel Wire, Tin Plated | |
| EPOXY RESIN | Flame Retardant Grade V-0 | |
| PLASTIC CASE | Flame Retardant Grade V-0 | |
| MARKING | MANUFACTURER'S SYMBOL | "KEYA ELECTRONICS CO., LTD" |
| TYPE OR MATERIAL | "MKP" stands for "X2" type | |
| CAPACITOR CLASS | "X2" stands for "X2" class | |
| NOMINAL CAPACITANCE | Expressed in 3-digit (EIA) code. | |
| TOLERANCE | J (5%), K (10%), M (20%) | |
| RATED VOLTAGE | 310-350-380V in VAC rating. (50/60Hz) | |
| CLIMATIC CATEGORY | 40/110/21/B | |
| APPROVAL MARKS | cULus / ENEC / CQC | |
| MANUFACTURE CODE | e.g., 182235 -- Batch number 2235 in year 2018 | |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals) | Apply 1.5-2 times rated DC voltage for 60 seconds. Shall be no abnormality. (For non-standard miniaturized products) Apply DC for 60 sec. (Should be no more than 150V/s rate increased from zero to the test voltage, testing time, meets the test voltage should be calculated at the end of the trial, the voltage should be reduced to zero and the capacitor through a resistor of appropriate discharge.) |
| Withstand Voltage (Between Terminals & Enclosure) | Apply 2*Ur+1,500VAC for 2 to 5 sec. Min. 2,000VAC. Shall be no abnormality. | |
| Dissipation Factor (DF) @ 1 KHz | 0.001 (0.1%) max. (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) | |
| Capacitance (CAP) | Within the tolerance specified (at +20 5). (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) | |
| Insulation Resistance (I.R.) | 15,000 M (for C0.33uF). Apply 100 VDC, Charge Time: 605 sec. | |
| 5,000 M*uF/C (for C>0.33uF). Apply 100 VDC, Charge Time: 605 sec. | ||
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. Soldering temperature: +265 5. Immersion duration: 3 0.5 sec. | |
| MECHANICAL CHARACTERISTICS | Terminal Strength (Tensile Strength) | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. Shall be no abnormality. |
| ENDURANCE CHARACTERISTICS | Temperature Cycle | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test: 5 cycles of +20/-40/+20/+110/+20 with specified durations. After test, allow to stabilize for 1.5 0.5 Hrs. at ordinary condition before measurements.) |
| Dry Heat Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: +110 2. Test Duration: 16 + 1/-0 hrs.) | |
| Cold Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: -40 3. Test Duration: 2 1 hrs.) | |
| Damp Heat | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: +40 2. Test Humidity: 90% to 95% R.H. Test Duration: 21 days. After test, allow to stabilize for 1.5 0.5 Hrs. at ordinary condition before measurements.) |
2410121353_KYET-PX184K2H1502_C19273035.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
