<
>
Specifications
Capacitance:
33nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
KP333J1000VP15
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
KP333J1000VP15
Product Description
Product Overview
This specification covers the KYET MMKP82 series of double-sided metallized polypropylene film capacitors. These capacitors utilize organic films as dielectrics and are designed for reliable operation within specified voltage and current limits. They are suitable for applications requiring stable capacitance and low loss, with a wide operating temperature range.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: UL V-0 (Flame Retardant for Epoxy Resin and Plastic Case)
Technical Specifications
| CHIEFCON P/N | CUSTOMER P/N | CAP. (UF) | Tol. (%) | R.V. (VDC) | W (mm) | H (mm) | T (mm) | P (mm) | d (mm) | L (min) |
| KP333J3A1501 | 0.033 | 5 | 1000 | 18 | 13.5 | 7.5 | 15 | 0.75 | 15 |
| ITEM | DESCRIPTIONS | SPECIFICATIONS |
| SCOPE | Product Type | Double-sided metallized polypropylene film capacitor MMKP82 |
| STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS | AMBIENT TEMPERATURE | 15 to 35 (If there is any doubt on the results, the measurements shall be made at +20 5) |
| RELATIVE HUMIDITY(R.H.) | 45%to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%) | |
| AIR PRESSURE | 86 kpa to 106 kpa | |
| OPERATING TEMPERATURE RANGE | -40 to +105 for which the capacitor can be operated continuously at rated voltage. | |
| CONSTRUCTION | DIELECTRIC | Metallized Polypropylene Film |
| METAL SPRAY | Special Solder | |
| LEAD WIRE | Copper-clad Steel Wire | |
| EPOXY RESIN | UL V-0 Flame Retardant Grade | |
| PLASTIC CASE | UL V-0 Flame Retardant Grade | |
| MARKING | MANUFACTURER'S SYMBOL | KYET ELECTRONICS CO., LTD |
| TYPE OR MATERIAL | MMKP82 | |
| CAPACITOR CLASS | MPP | |
| NOMINAL CAPACITANCE | Expressed in 3-digit (EIA) code. | |
| TOLERANCE | J (5%) , K(10%) , M(20%) | |
| RATED VOLTAGE | 400,450,630,800,1000,1600,2000 VDC | |
| Operating Temperature Range | -40105 | |
| DISSIPATION FACTOR (DF) | Max 0.1%(at 1KHZ, 25) | |
| INSULATION RESISTANCE (IR) | CR0.33F IR10000M UR100V; CR0.33F IR5000M/F UR100V | |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals) | Apply 1.5*Ur (DC) for 60 sec. Shall be no abnormality. |
| Withstand Voltage (Between Terminals & Enclosure) | Apply 2*Ur+500V for 2 to 5 sec. Min. 2000VDC. Shall be no abnormality. | |
| DISSIPATION FACTOR (DF) | 0.001(0.1%) at 1 KHz. Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | |
| CAPACITANCE (CAP) | Within the tolerance specified (at +20 5). Measuring Frequency: 2%; Measuring Voltage: 1 Vrms. | |
| INSULATION RESISTANCE (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf). Vt=100 VDC, Charge Time : 605 sec. | |
| SOLDERING PROPERTY | More than 90% of circumferential surface of lead wire shall be covered with new solder. Soldering temperature: +260 5, Immersion duration: 2 0.5 sec. | |
| MECHANICAL CHARACTERISTICS | TERMINAL STRENGTH (Tensile Strength) | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction. Shall be no abnormality. |
| ENDURANCE CHARACTERISTICS | TEMPERATURE CYCLE | 5 cycles. Conditions: 1. +20 2 for 3 min. 2. -40 3 for 10 min. 3. +20 2 for 3 min. 4. +100 2 for 10min. 5. +20 2 for 3 min. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
| Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | ||
| DRY HEAT RESISTANCE | Test Temperature: +100 2, Test Duration: 16 1 hrs. | |
| Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | ||
| COLD RESISTANCE | Test Temperature: -40 3, Test Duration: 2 1 hrs. | |
| Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. @ 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. | ||
| DAMP HEAT | Test Temperature: +40 2, Test Humidity: 90 to 95 R.H., Test Duration: 2 1 hrs. After test, allow 1.5 0.5 Hrs. at ordinary condition. |
2504101957_KYET-KP333J1000VP15_C390163.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
