<
>
Specifications
Capacitance:
10nF
Operating Temperature:
-40℃~+105℃
Tolerance:
±5%
Voltage Rating:
1kV
Mfr. Part #:
MMKP103J3A1001
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MMKP103J3A1001
Product Description
Product Overview
The KYET MMKP82 is a double-sided metallized polypropylene film capacitor designed for reliable performance in various electronic circuits. It is suitable for applications requiring stable capacitance and low loss. The capacitor features a plastic case and leads with epoxy resin encapsulation, meeting UL V-0 flammability rating.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certification: UL V-0 (for encapsulation and plastic case)
Technical Specifications
| Customer Name | KYET P/N | Customer P/N | Approval No. | Issued Date | Capacitance (NF) | Tolerance (%) | R.V. (VDC) | Dimensions (mm) W1 | Dimensions (mm) H1 | Dimensions (mm) T1 | Dimensions (mm) P0.5 | Dimensions (mm) d0.05 | Dimensions (mm) L min | Product Code |
| MMKP103J3A1001 | 2020011001 | 2020/1/10 | 10 | 5 | 1000 | 13 | 13 | 7 | 10 | 0.6 | 15 | KYET MMKP82 103J 1000V |
| Item | Description | Conditions |
| Scope | This specification applies to KYET MMKP82 Metallized Polypropylene Film Capacitor. | |
| Standard Atmospheric Conditions for Measurements | Ambient Temperature | 15 to 35 (If any doubt, +20 5) |
| Relative Humidity (R.H.) | 45% to 75% (If any doubt, 60% to 70%) | |
| Air Pressure | 86 kpa to 106 kpa | |
| Operating Temperature Range | -40 to +105 | |
| Construction | Dielectric | Metallized Polypropylene Film |
| Metal Spray | Special Solder | |
| Lead Wire | Tinned Copper Wire | |
| Epoxy Resin | UL V-0 Flame Retardant Grade | |
| Plastic Case | UL V-0 Flame Retardant Grade | |
| Marking | Manufacturer's Symbol | KYET ELECTRONICS CO., LTD |
| Type or Material | MMKP82 (Metallized Polypropylene Film) | |
| Capacitor Class | KP (MMKP class) | |
| Nominal Capacitance | Expressed in 3-digit (EIA) code. | |
| Tolerance | J (5%), K (10%), M (20%) | |
| Rated Voltage | 400, 450, 630, 800, 1000, 1600, 2000 VDC | |
| Operating Temperature Range | -40105 | |
| Dissipation Factor (Max) | 0.1% (at 1KHz, 25) | |
| Insulation Resistance | CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V) | |
| Electrical Characteristics | Withstand Voltage (Between Terminals) | 1.5*Ur (DC) for 60 sec. (No abnormality) |
| Withstand Voltage (Between Terminals & Enclosure) | 2*Ur+500V for 2 to 5 sec. Min. 2000VDC | |
| Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) | |
| Capacitance (CAP) | Within the tolerance specified (at +20 5) (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) | |
| Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) (Test Voltage: 100 VDC; Charge Time: 605 sec) | |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. (Soldering temperature: +260 5; Immersion duration: 2 0.5 sec) | |
| Mechanical Characteristics | Terminal Strength (Tensile Strength) | Shall be no abnormality. (Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction) |
| Endurance Characteristics | Temperature Cycle | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. (Total 5 cycles: -40 to +100) |
| Dry Heat Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. (Test Temperature: +100 2; Test Duration: 16 1 hrs) | |
| Cold Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance: 50% of the limit value of NO.5.4. (Test Temperature: -40 3; Test Duration: 2 1 hrs) | |
| Damp Heat | Appearance: Shall be no remarkable change. (Test Temperature: +40 2; Test Humidity: 90% to 95% R.H.; Test Duration: 2 1 hrs) |
2504101957_KYET-MMKP103J3A1001_C484936.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
