<
>
Specifications
Capacitance:
2.2uF
Operating Temperature:
-
Ratings:
X2
Voltage(AC):
310V;350V;380V
Tolerance:
±10%
safety certification:
-
Mfr. Part #:
PX225K2C2707
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
PX225K2C2707
Product Description
Product Overview
The KYET MKP-X2 is a metallized polypropylene film AC capacitor designed for suppressing electromagnetic interference in power supplies. It is suitable for applications requiring reliable performance and safety, conforming to Class-X2 standards.
Product Attributes
- Brand: KYET
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Case Color: Grey
- Encapsulation: Grey Epoxy Resin
- Certifications: cULus / ENEC / CQC
Technical Specifications
| KYET P/N | CUSTOMER P/N | CAP. (F) | Tol. % | R.V. (VAC) | W (mm) | H (mm) | T (mm) | P (mm) | d (mm) | VDC (V) | Marking |
| PX225K2C2707 | X2 225K310VAC | 2.2 | 10 | 310VAC | 31.5 | 21.5 | 13 | 27.5 | 0.8 | 900 | KYET 225K 10% 310VAC X2 40/110/21 B cULus ENEC CQC 182235 |
| Item | Description | Details |
| SCOPE | Application | This specification applies to KYET Metallized Polypropylene Film AC Capacitor (Interference Suppressors Class-X2). |
| STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS | Ambient Temperature | 15 to 35 (If there is any doubt on the results, the measurements shall be made at +20 5) |
| STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS | Relative Humidity (R.H.) | 45% to 75% (If there is any doubt on the results, the measurements shall be made at 60% to 70%) |
| STANDARD ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS | Air Pressure | 86 kpa to 106 kpa |
| OPERATING TEMPERATURE RANGE | Temperature Range | -40 to +110 for which the capacitor can be operated continuously at rated voltage. |
| CONSTRUCTION | Dielectric | Metallized Polypropylene Film |
| CONSTRUCTION | Metal Spray | Zinc Tin Alloy Special Solder |
| CONSTRUCTION | Lead Wire | Tin-plated Copper-clad Steel Wire |
| CONSTRUCTION | Epoxy Resin | V-0 Flame Retardant Rating |
| CONSTRUCTION | Plastic Case | V-0 Flame Retardant Rating |
| MARKING | Manufacturer's Symbol | KYET ELECTRONICS CO., LTD |
| MARKING | Type | MKP (for X2 type) |
| MARKING | Capacitor Class | X2 |
| MARKING | Nominal Capacitance | Expressed in 3-digit (EIA) code. |
| MARKING | Tolerance | J (5%), K (10%), M (20%) |
| MARKING | Rated Voltage | 310-350-380V in VAC rating. (50/60Hz) |
| MARKING | Climatic Category | 40/110/21/B |
| MARKING | Manufacture Code | Batch number (e.g., 182235 for 2018, batch 2235) |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals) | 1.5-2 times rated DC voltage for 60 seconds (for non-standard miniaturized products); Apply (DC) for 60 sec (Should be no more than 150V/s rate increased from zero to the test voltage, testing time, meets the test voltage should be calculated at the end of the trial, the voltage should be reduced to zero and the capacitor through a resistor of appropriate discharge.) |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals & Enclosure) | 2*Ur+1,500VAC for 2 to 5 sec. Min. 2,000VAC |
| ELECTRICAL CHARACTERISTICS | Dissipation Factor (DF) | 0.001 (0.1%) at 1 KHz (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) |
| ELECTRICAL CHARACTERISTICS | Capacitance (CAP) | Within the tolerance specified (at +20 5). (Measuring Frequency: 2%; Measuring Voltage: 1 Vrms) |
| ELECTRICAL CHARACTERISTICS | Insulation Resistance (I.R.) | 15,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) (Vt=100 VDC, Charge Time: 605 sec.) |
| ELECTRICAL CHARACTERISTICS | Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. (Soldering temperature: +265 5, Immersion duration: 3 0.5 sec.) |
| MECHANICAL CHARACTERISTICS | Terminal Strength (Tensile Strength) | Shall be no abnormality. Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. |
| ENDURANCE CHARACTERISTICS | Temperature Cycle | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test: 5 cycles of -40 to +110) |
| ENDURANCE CHARACTERISTICS | Dry Heat Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: +110 2, Test Duration: 16 + 1/-0 hrs) |
| ENDURANCE CHARACTERISTICS | Cold Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: -40 3, Test Duration: 16 1 hrs) |
| ENDURANCE CHARACTERISTICS | Damp Heat | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate (C/C): Within 5% of the value before test. Dissipation Factor: 0.002 (0.2%) max. at 1KHz. Insulation Resistance (I.R.): 50% of the limit value of NO.5.4. (Test Temperature: +40 2, Test Humidity: 90% to 95% RH, Test Duration: 21 days) |
2409272303_KYET-PX225K2C2707_C18214245.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
