<
>
Specifications
Capacitance:
180nF
Operating Temperature:
-40℃~+110℃
Ratings:
X2
Tolerance:
±10%
Voltage(AC):
310V;350V;380V
safety certification:
CQC;ENEC;UL
Mfr. Part #:
PX184K2C1001
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
PX184K2C1001
Product Description
Product Overview
The KYET MKP-X2 is a metallized polypropylene film AC capacitor designed for suppressing electromagnetic interference in power supplies. It is suitable for applications requiring reliable performance and safety, with V-0 flame retardant ratings for both the epoxy resin and plastic case. The capacitor operates within a wide temperature range and is built to withstand various environmental conditions.
Product Attributes
- Brand: KYET ()
- Origin: Dongguan, China
- Material: Metallized Polypropylene Film
- Certifications: cULus, ENEC, CQC
Technical Specifications
| KYET P/N | CUSTOMER P/N | CAP. (F) | Tol. % | R.V. (VAC) | W (mm) | H (mm) | T (mm) | P (mm) | d (mm) | L (mm) | Test VDC | Marking | Type |
| X2 184K310VAC P10 | PX184K2C1001 | 0.18 | 10 | 310VAC | 13 | 12 | 6 | 10 | 0.6 | 20 | 1200 | KYET X2 184K 10 P10 40/110/21/B cULus ENEC CQC | MKP-X2 |
Electrical Characteristics
| Item | Description |
| Withstand Voltage (Between Terminals) | 1.5-2 times rated DC voltage for 60 seconds (non-standard miniaturized products); Apply (DC) for 60 sec. (Should be no more than 150V/s rate increased from zero to the test voltage, testing time, meets the test voltage should be calculated at the end of the trial, the voltage should be reduced to zero and the capacitor through a resistor of appropriate discharge.) |
| Withstand Voltage (Between Terminals & Enclosure) | 2*Ur+1,500VAC for 2 to 5 sec. Min. 2,000VAC |
| Dissipation Factor (DF) @ 1 KHz | 0.001 (0.1%) |
| Capacitance Tolerance | Within the tolerance specified (at +20 5). |
| Insulation Resistance (I.R.) (C0.33uf) | 15,000 Mohm (Vt=100 VDC, Charge Time: 605 sec.) |
| Insulation Resistance (I.R.) (C>0.33uf) | 5,000 Mohm*uF/C (Vt=100 VDC, Charge Time: 605 sec.) |
Mechanical Characteristics
| Item | Description |
| Terminal Strength (Tensile Strength) | Shall be no abnormality. Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction and acting in a direction away from the body. |
| Soldering Property | More than 90% of circumferential surface of lead wire shall be covered with new solder. Soldering temperature: +265 5. Immersion duration: 3 0.5 sec. |
Endurance Characteristics
| Item | Description |
| Temperature Cycle | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test conditions: 5 cycles of -40 to +110) |
| Dry Heat Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test conditions: +110 2 for 16 + 1/-0 hrs.) |
| Cold Resistance | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test conditions: -40 3 for 2 1 hrs.) |
| Damp Heat | Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5% of the value before test. Dissipation Factor @ 1KHz: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test conditions: +40 2, 90% to 95% R.H. for 21 days) |
2409272303_KYET-PX184K2C1001_C5116058.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
