Product Overview
The PCF series ceramic resistors are designed for anti-pulse surge applications, featuring KOA's original bulk ceramic resistor technology. These non-inductive resistors offer excellent in-pulse and inrush current characteristics, with a flame retardant coating equivalent to UL94V0. They provide higher reliability against disconnection compared to wirewound and film resistors and are AEC-Q200 tested. Products meet EU RoHS requirements.
Product Attributes
- Brand: KOA
- Resistor Type: Ceramic Bulk
- Flame Retardant Coating: Equivalent of UL94V0
- Certifications: EU RoHS compliant, AEC-Q200 Tested
- Reliability: Higher reliability against disconnection compared to wirewound and film resistors
- Characteristics: Excellent in-pulse and inrush current characteristics, Non-inductive
Technical Specifications
| Model | Power Rating @ 70C | Resistance Range () | T.C.R. (x10-6/K) | Operating Temp. Range (C) | Rated Ambient Temp. (C) | Dielectric Withstanding Voltage (V) | Maximum Working Voltage (V) | Maximum Overload Voltage (V) |
|---|---|---|---|---|---|---|---|---|
| PCF1/2 | 0.5W | 4.7 - 100K | -500 ~ -1300: 3.3R<10 -600 ~ -1500: 10R<100 -700 ~ -1800: 100R<1k -900 ~ -1900: 1kR<100k -900 ~ -2000: 100kR<200k -900 ~ -2200: 200kR390k | -40C to +200C | +70C | 200V | 400V | 10kV: 4.7R<10k 10kV: 10kR<33k 10kV: 33kR<100k |
| PCF1 | 1.0W | 3.3 - 330K | -500~-1300:3.3R<10 -600~-1500:10R<100 -700~-1800:100R<1k -900~-1900:1kR<100k -900~-2000:100kR<200k -900~-2200:200kR390k | -40C to +200C | +70C | 300V | 600V | 14kV:3.3R<30k 14kV:30kR<390k |
| PCF2 | 2.0W | 4.7 - 100K | -500~-1300:3.3R<10 -600~-1500:10R<100 -700~-1800:100R<1k -900~-1900:1kR<100k -900~-2000:100kR<200k -900~-2200:200kR390k | -40C to +200C | +70C | 400V | 800V | 20kV:3.3R<10k 20kV:10kR<390k |
| Type | Dimensions (inches / mm) | Lead Wire Diameter (nom.) | Lead Wire Length (mm) | Coating Diameter (max.) | Resistive Body Diameter (nom.) | Resistive Body Length |
|---|---|---|---|---|---|---|
| PCF1/2 | L: 1.18.118 (30.03.0) C: 0.65.039 (16.51.0) | .031 (0.8) | * Varies with taping type | .276.039 (7.01.0) | .138.02 (3.50.5) | .437 (11.1) |
| PCF1 | L: 1.50.118 (38.03.0) C: 0.748.039 (19.01.0) | .028 (0.7) | * Varies with taping type | .354.039 (9.01.0) | .217.039 (5.51.0) | .748 (19.0) |
| PCF2 | L: 1.50.118 (38.03.0) C: 0.748.039 (19.01.0) | .028 (0.7) | * Varies with taping type | .437 (11.1) | .217.039 (5.51.0) | .886 (22.5) |
| Performance Parameter | Requirement R ((% + 0.05)) | Limit Typical | Test Method |
|---|---|---|---|
| Resistance | Within regulated to tolerance | ||
| T.C.R. | +25C/-40C, +25C/+75C and +25C/+125C | ||
| Voltage Coefficient (Apply for over 1k) | 0~-0.2%/V | Rated voltage and rated voltage x 10% | |
| Overload | 2% | 0.4% | Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less |
| Resistance to soldering heat | 2% | 0.8% | 350C10C, 3.5s0.5s |
| Rapid change of temperature | 2% | 0.4% | -40C (30 min.)/+85C (30 min.), 5 cycles |
| Moisture resistance | 5% | 0.6% | 40C2C, 90%~95%RH, 1000 hours, 1.5h ON/0, 5h OFF cycles |
| Load life | 5% | 0.4% | 70C2C, 1000h, 1.5h ON/0, 5h OFF cycles |
| Resistance to Solvent | No abnormality in appearance. Marking shall be easily legible. | Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops, then brushing 10 times. | |
| Resistance to pulse (10,000 cycles) | PCF1/2: 5% PCF1: 10% PCF2: 5% | PCF1/2: 10 PCF1: 25 PCF2: 10 | SW C=1.000pF 1 sec ON 1 sec OFF Protection resistor DC (Max. pulse voltage) Rx (In insulation oil) |
Ordering Information Example: PCF 1 C R 103 K
- Type: PCF
- Power Rating: 1 (1W)
- Termination Material: C (SnCu)
- Packaging: R (Reel)
- Nominal Resistance: 103 (10k)
- Tolerance: K (10%)
Note: For further information on packaging, please refer to Appendix C.
2411220016_KOA-PCF2CT631R3R3K_C20097614.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible