<
>
Specifications
Type:
Ceramic Resistor
Resistance:
6.8Ω
Power(Watts):
2W
Temperature Coefficient:
-1300ppm/℃~-500ppm/℃
Tolerance:
±10%
Operating Temperature:
-40℃~+200℃
Mfr. Part #:
PCF2CT631R6R8K
Package:
Through Hole,D7xL19mm
Key Attributes
Model Number:
PCF2CT631R6R8K
Product Description
Product Overview
The PCF series ceramic resistors are designed for anti-pulse surge applications, featuring KOA's original bulk ceramic resistor technology. These non-inductive resistors offer excellent in-pulse and inrush current characteristics, with a flame retardant coating equivalent to UL94V0. They provide higher reliability against disconnection compared to wirewound and film resistors and are AEC-Q200 tested. Products meet EU RoHS requirements.
Product Attributes
- Brand: KOA
- Material: Ceramic
- Coating: Flame retardant (Equivalent of UL94V0)
- Certifications: EU RoHS compliant, AEC-Q200 Tested
- Construction: Non-inductive
- Termination Material: SnCu
Technical Specifications
| Type | Power Rating @ 70C | Resistance Range () | T.C.R. (x10-6/K) | Operating Temp. Range | Rated Ambient Temp. | Max. Working Voltage | Dielectric Withstanding Voltage | Max. Pulse Voltage |
|---|---|---|---|---|---|---|---|---|
| PCF1/2 | 0.5W | 4.7 - 100K | -500 ~ -1300: 3.3R<10 -600 ~ -1500: 10R<100 -700 ~ -1800: 100R<1k -900 ~ -1900: 1kR<100k -900 ~ -2000: 100kR<200k -900 ~ -2200: 200kR390k | -40C to +200C | +70C | 200V | 400V | 10kV: 4.7R<10k 10kV: 10kR<33k 10kV: 33kR<100k 4kV: 10kR<100k |
| PCF1 | 1.0W | 3.3 - 330K | -500~-1300: 3.3R<10 -600~-1500: 10R<100 -700~-1800: 100R<1k -900~-1900: 1kR<100k -900~-2000: 100kR<200k -900~-2200: 200kR390k | -40C to +200C | +70C | 300V | 600V | 14kV: 3.3R<30k 14kV: 30kR<390k 7kV: 30kR<390k |
| PCF2 | 2.0W | 4.7 - 100K | -500~-1300: 3.3R<10 -600~-1500: 10R<100 -700~-1800: 100R<1k -900~-1900: 1kR<100k -900~-2000: 100kR<200k -900~-2200: 200kR390k | -40C to +200C | +70C | 400V | 800V | 20kV: 3.3R<10k 20kV: 10kR<390k 11kV: 10kR<390k |
| Performance Requirements | R (% + 0.05) | Limit Typical | Test Method |
|---|---|---|---|
| Resistance | Within regulated to tolerance | ||
| T.C.R. | +25C/-40C, +25C/+75C and +25C/+125C | ||
| Voltage Coefficient (Apply for over 1k) | 0~-0.2%/V | Rated voltage and rated voltage x 10% | |
| Resistance Measurement voltage | 3.3=| | | |
| Overload | 2% | 0.4% | Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less |
| Resistance to pulse | Refer to the table on the right | SW C=1.000pF 1 sec ON 1 sec OFF Protection resistor DC (Max. pulse voltage) Rx (In insulation oil) Maximum Overload Voltage Maximum Working Voltage | |
| Resistance to soldering heat | 2% | 0.8% | 350C10C, 3.5s0.5s |
| Rapid change of temperature | 2% | 0.4% | -40C (30 min.)/+85C (30 min.), 5 cycles |
| Moisture resistance | 5% | 0.6% | 40C2C, 90%~95%RH, 1000 hours, 1.5h ON/0, 5h OFF cycles |
| Load life | 5% | 0.4% | 70C2C, 1000h, 1.5h ON/0, 5h OFF cycles |
| Resistance to Solvent | No abnormality in appearance. Marking shall be easily legible. | Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops, then brushing 10 times. |
| Type | Dimensions | (max.) | D (nom.) | d (nom.) | C (max.) |
|---|---|---|---|---|---|
| PCF1/2 | inches (mm) | 1.18.118 (30.03.0) | 0.437 (11.1) | .031 (0.8) | .138.02 (3.50.5) |
| PCF1 | inches (mm) | 1.50.118 (38.03.0) | 0.748 (19.0) | .028 (0.7) | .217.039 (5.51.0) |
| PCF2 | inches (mm) | .886 (22.5) | .748 (19.0) | .354.039 (9.01.0) | .276.039 (7.01.0) |
Ordering Information Example: PCF1 C R 103 K
Structure:
- PCF: Series Name
- 1: Power Rating (1/2=0.5W, 1=1W, 2=2W)
- C: Termination Material (SnCu)
- R: Packaging (Reel)
- 103: Nominal Resistance (2 significant figures + 1 multiplier, e.g., 103 = 10k)
- K: Tolerance (10%)
Taping Types:
- T52: PCF1/2, PCF1
- T631: PCF1/2, PCF1, PCF2 (Axial Taping)
For further information on packaging, please refer to Appendix C.
2411220016_KOA-PCF2CT631R6R8K_C20097630.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
