<
>
Specifications
Power(Watts):
333mW
Resistance:
16Ω
Temperature Coefficient:
±200ppm/℃
Operating Temperature:
-55℃~+155℃
Type:
Thick Film Resistor
Tolerance:
±1%
Mfr. Part #:
SG73P2BTTD16R0F
Package:
1206
Key Attributes
Model Number:
SG73P2BTTD16R0F
Product Description
SG73P Series Anti-Surge Thick Film Chip Resistors
The SG73P series are anti-surge endured pulse power thick film chip resistors offering superior performance in pulse withstanding voltage and high power compared to RK73B/RK73H series. They feature down to 0.5% tolerance and are suitable for both reflow and flow solderings. Products with lead-free terminations meet EU RoHS requirements. They are AEC-Q200 Tested.
Product Attributes
- Brand: KOA Speer
- Certifications: AEC-Q200 Tested
- Material: Ceramic Substrate, Resistive Film, Protective Coating, Inner Electrode, Sn Plating, Ni Plating
Technical Specifications
| Part Designation | Size Code | Nominal Resistance | Tolerance | Power Rating (Rated Ambient Temp.) | Power Rating (Rated Terminal Part Temp.) | Absolute Maximum Working Voltage | Operating Temp. Range | T.C.R. (ppm/C) | Termination Material | Packaging |
|---|---|---|---|---|---|---|---|---|---|---|
| SG73P1E | (0402) | 1 10M | D: 0.5% | 0.125W (70C) | 0.2W (125C) | 75V | -55C to +155C | 100*1, 200 | Nil: Standard | TP: 7" 2mm pitch punch paper |
| SG73P1EW | (0402) | 1 1M | D: 0.5% | 0.25W (70C) | 0.25W (125C) | 75V | -55C to +155C | 100 | Nil: Standard | TP: 7" 2mm pitch punch paper |
| SG73P1J | (0603) | 1 10M | D: 0.5% | 0.25W (70C) | 0.33W (135C) | 100V | -55C to +155C | 100*1, 200 | Nil: Standard | TP: 7" 2mm pitch punch paper |
| SG73P2A | (0805) | 1 10M | D: 0.5% | 0.5W (70C) | 0.5W (125C) | 150V | -55C to +155C | 100*1, 200 | Nil: Standard | TD: 7" 4mm pitch punched paper |
| SG73P2B | (1206) | 1 10M | D: 0.5% | 0.5W (70C) | 0.75W (125C) | 200V | -55C to +155C | 100*1, 200 | Nil: Standard | TD: 7" 4mm pitch punched paper |
| SG73P2E | (1210) | 1 10M | D: 0.5% | 0.5W (70C) | 0.75W (110C) | 200V | -55C to +155C | 100*1, 200 | Nil: Standard | TD: 7" 4mm pitch punched paper |
| SG73P2E1 | (1210) | 1 10M | D: 0.5% | 1.0W (95C) | 1.0W (95C) | 200V | -55C to +155C | 100*1, 200 | Nil: Standard | TD: 7" 4mm pitch punched paper |
Performance Characteristics
| Parameter | Requirement | Limit | Typical | Test Method |
|---|---|---|---|---|
| Resistance | Within specified tolerance | |||
| T.C.R. | Within specified T.C.R. | |||
| Overload (Short time) | Rated Voltage x 2.5 for 5 seconds (1EW: 0.25W; 2A: 0.4W, 0.5W; 2B: 0.75W; 2E: 0.75W; 2E1: 1W rated voltage x 2 for 5 seconds) | 2% | 0.5% | |
| Resistance to Solder Heat | 260C 5C, 10 seconds 1 second | 1% | 0.75% | |
| Rapid Change of Temperature Characteristic (Nil) | -55C (30 min.)/+125C (30 min.) 100 cycles | 0.5% (Characteristic Nil Standard) 1% (Characteristic A Heat Shock Resistance) | 0.3% (Characteristic Nil Standard) 0.5% (Characteristic A Heat Shock Resistance) | |
| Moisture Resistance | 40C 2C, 90%~95%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle | 3% | 0.75% | |
| Endurance at 70C | 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle | 3% | 0.75% | |
| High Temperature Exposure | +155C, 1000 hours | 1% | 0.3% |
2412061743_KOA-SG73P2BTTD16R0F_C4269985.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
