SHENZHEN JINGYOUJIA ELECTRONIC CO., LTD CRYSTAL RESONATOR SPECIFICATIONS
This document outlines the specifications for the S4T series crystal resonator manufactured by SHENZHEN JINGYOUJIA ELECTRONIC CO., LTD. It details electrical parameters, equivalent circuit, physical dimensions, reflow soldering profiles, mechanical reliability, and packing information for the S4T26298ZYFAC model.
Product Attributes
- Brand: SHENZHEN JINGYOUJIA ELECTRONIC CO., LTD
- Origin: Shenzhen, China
- Model: S4T
- Customer Part Number: S4T26298ZYFAC
- Frequency: 26.2982MHz
- Date: 2021-06-16
Technical Specifications
| Item | Symb | Electrical Specification | Min. | Type | Max. | Units | Remark |
|---|---|---|---|---|---|---|---|
| Nominal Frequency | F0 | 26.2982 | MHz | ||||
| Mode of Vibration | Fundamental | ||||||
| Frequency Tolerance | F/F0 | -10 | 10 | ppm | At 253 | ||
| Operating Temperature Range | TOPR | -20 | 70 | ||||
| Frequency Stability | TC | -20 | 20 | ppm | |||
| Storage Temperature | TSTG | -40 | 85 | ||||
| Load Capacitance | CL | 20 | PF | ||||
| Equivalent Series Resistance | ESR | 60 | |||||
| Drive Level | DL | 100 | W | ||||
| Insulation Resistance | IR | 500 | M | At 100VDC | |||
| Shunt Capacitance | C0 | 1.36+-10% | PF | ||||
| Motional Capacitance | C1 | 5.14+-10% | PF | ||||
| Aging Per Year | Fa | First Year | -3 | 3 | ppm |
Reflow Profiles
| Profiles Feature | |||
|---|---|---|---|
| Pb-Free Assembly | |||
| Average Ramp-up Rate (Ts max to Tp) | 3/second max. | ||
| Preheat Temperature Min (Ts min) | 125 | ||
| Temperature Max(Ts max) | 200 | ||
| Time (ts min to ts max) | 60~180 seconds | ||
| Temperature (TL) | 217 | ||
| Time (tL) | 60~150 seconds | ||
| Peak/Classification Temperature (Tp) | |||
| Time within 5of actual Peak Temperature(tp) | 2040 second | ||
| Ramp-down rate | 6/second max. | ||
| Time 25to Peak Temperature | 8 minutes max. | ||
| Suggest reflow times | 3 times max. |
Mechanical Reliability
| Item | Condition | Standard |
|---|---|---|
| Drop characteristics | Free drop from 50cm height on a hard wooden board for 3 times. (Board is thickness more than 30 mm.) | Frequency change: 5ppm Rr as specification |
| Shake characteristics | Shake frequency 10~55Hz, cyc1~2 minutes, swing 1.5mm, direction x/y/z, all 30 minutes, test after 1 hours. | Frequency change: 5ppm Rr as specification |
| Airproof characteristics | Put crystal into the pressure cabin with alcohol, keep pressure 0.4~0.5mpa 10 minutes, then take out and blow for 5 minutes | IR500M |
| Weld characteristics | 260Max, 10 seconds | 90% exhibit tin ok |
| Humidity characteristics | +402& 90%~95% R.H. 250 hours | Frequency change: 5ppm Rr as specification |
| Low temperature characteristics | -302, 250 hours, put in room temperature, test after 1 hours. | Frequency change: 5ppm Rr as specification |
| High temperature characteristics | +852, 250 hours, put in room temperature, test after 1 hours. | Frequency change: 5ppm Rr as specification |
| Temperature cycling | -303/303 min~+852/303min, 5 cycles | Frequency change: 5ppm Rr as specification |
Packing
| Item | Capacity |
|---|---|
| Capacity of a plastic reel | 3000 PCS |
| Capacity per inner box | 3000 PCS (A reel inner) |
| Capacity per outer carton | 10000 PCS (10inner box) |
2410121924_JYJE-S4T26298ZYFAC_C2838421.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible