<
>
Specifications
Capacitance:
150nF
Operating Temperature:
-40℃~+110℃
Ratings:
X2
Tolerance:
±10%
Mfr. Part #:
JWX2-XT154KP7.5B5
Package:
Through Hole,P=7.5mm
Key Attributes
Model Number:
JWX2-XT154KP7.5B5
Product Description
Product Overview
The JURCC X2 class safety capacitor is designed for suppressing electromagnetic interference in power supplies. It is suitable for cross-circuit applications with a rated voltage of up to 310VAC and frequencies of 50-60Hz. It can also be used for LED driver power PFC filtering. Manufactured using a polypropylene film dielectric and zinc-aluminum metal layer electrodes, these capacitors are housed in a flame-retardant PBT plastic case and encapsulated with epoxy resin. Their compact design is ideal for high-density installations.
Product Attributes
- Brand: JURCC
- Origin: Guangdong, China
- Material: Polypropylene film dielectric, Zinc-aluminum metal layer electrodes, PBT plastic case, Epoxy resin encapsulation
- Certifications: UL, CSA, ENEC, VDE, CQC, KTC
Technical Specifications
| JURCC Part Number | Model | Capacitance | Voltage | Pitch (P0.5MM) | Lead Length (L+0.5MM) | Dimensions (W*T*H0.5mm) | Lead Diameter ( 0.02MM) |
| XT00001 | JWX2-XT223KP7.5B3 | 223K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00003 | JWX2-XT103KP7.5B3 | 103K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00009 | JWX2-XT154KP7.5B5 | 154K | 310V AC | 7.5 | 18 | B5(9.5*6*12) | 0.6 |
| XT00021 | JWX2-XT102KCP7.5B3 | 102K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00025 | JWX2-XT153KP7.5B3 | 153K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00048 | JWX2-XT333KP7.5B3 | 333K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00082 | JWX2-XT683KP7.5B3 | 683K | 310V AC | 7.5 | 15 | B3(9.5*4*9) | 0.6 |
| XT00110 | JWX2-XT104KP7.5B4 | 104K | 310V AC | 7.5 | 18 | B4(9.5*5*11) | 0.6 |
| XT00111 | JWX2-XT473KP7.5B4 | 473K | 310V AC | 7.5 | 18 | B4(9.5*5*11) | 0.6 |
| XT00112 | JWX2-XT224KP7.5B5 | 224K | 310V AC | 7.5 | 18 | B5(9.5*6*12) | 0.6 |
Electrical Performance Tests
| No. | Test Item | Test Conditions (Test Method) | Judgment Standard (Performance Requirements) |
| 1 | Capacitance and Loss | 1KHZ,1.0VDC | Capacitance within range, Loss 0.1% |
| 2 | Inter-terminal Withstand Voltage | 1200VDC, 1 minute | No breakdown or arcing |
| 3 | Case-to-terminal Withstand Voltage | 2120VAC, 1 minute | No breakdown or arcing |
| 4 | Insulation Resistance | 100VDC, 1 minute | 1. R.C > 2000M when C > 0.3uF 2. R > 6000M when C 0.3uF |
| 5 | Solderability | Solder temperature: 2355; Immersion time: 2.00.5S | At least 95% of the surface around the lead terminals is uniformly covered with solder, and the body has no visible damage. |
| 6 | Resistance to Soldering Heat | Solder bath temperature: 2605 Immersion time: 10S0.5S | 1. No visible damage 2. Capacitance change rate 5% |
| 7 | Marking Resistance to Solvent | Immersed in a mixture of trichlorotrifluoroethane and isopropanol (305%) at 235, 705%RH for 50.5MIN, wiped 10 times with absorbent cotton. | Marking clear, no visible damage |
| 8 | Damp Heat (Steady State) | No voltage applied; Temperature: 402, Humidity: 93(+2,-3)%RH, Duration: 56 days | 1. No visible damage to appearance; 2. Capacitance change 5%; 3. Tangent of loss angle change: 0.008(Cr1.0Uf), 0.005(Cr1.0Uf) 4. No breakdown or arcing when tested under initial conditions; 5. IR 50% of initial value |
| 9 | Impact or Shock | 1000 times or 4000 times, acceleration 390M/s, pulse duration 6MS. | 1. No visible damage to appearance; 2. Capacitance change 5%; 3. Tangent of loss angle change: 0.008(Cr1.0Uf), 0.005(Cr1.0Uf) 4. No breakdown or arcing when tested under initial conditions; 5. IR 50% of initial value |
| 10 | Vibration | Vibration frequency range is 10-55HZ, amplitude is 0.75MM, vibration from 10HZ to 55HZ and back to 10HZ, approximately 1 minute, total time 6 hours, 3 times in each of the three mutually perpendicular directions every 2 hours. | No visible damage to appearance |
| 11 | Rapid Change of Temperature | The capacitor should withstand 5 temperature cycles. | No visible damage to appearance |
| 12 | Lead Strength | Tensile test: 0.5MM d0.8MM, 10N (in the direction of the pin), 10S. Bending test: 0.5MM d0.8MM, 5N, rotate the capacitor body to 90 degrees, release to 180 degrees opposite position and return to the original point, perform 2 continuous bends in each direction. | 1. No visible damage to pins 2. Capacitance change 5% |
2504101957_JURCC-JWX2-XT154KP7-5B5_C47278902.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
