JOEY ELECTRONICS CO., LTD. - SPECIFICATION OF PLASTIC FILM CAPACITOR FOR APPROVAL
This specification applies to capacitors of type "MEMB" (METALLIZED POLYESTER FILM CAPACITOR). These capacitors are designed for general-purpose applications and are suitable for use within an operating temperature range of -40 to +85 (with derating up to +105). They feature a plastic case construction with metallized polyester film elements.
Product Attributes
- Brand: JOEY ELECTRONICS CO., LTD.
- Product Series: MEMB
- Material: Metallized Polyester Film
- Construction: Plastic Case, Epoxy Resin & Wax, Wire Leads
- Certifications: RoHS & Without Halogen
Technical Specifications
| Joey Part No. | Item | Capacitance (f) | Rated Voltage (VDC) | Pitch (mm) | W (mm) | H (mm) | T (mm) | d (mm) | Fig. | Remark |
|---|---|---|---|---|---|---|---|---|---|---|
| MIB154J2E2AA220MA1 | MEMB 154J250V | 0.15 | 250 | 5 | 7.2 | 10 | 5 | 0.8 | 1 | 5AA5 |
| MIB222J2G2AA220MA1 | MEMB 222J400V | 2.2 | 400 | 5 | 7.2 | 6.5 | 2.5 | 0.5 | 1 | 5AA5 |
| MIB225J2A2AA220MA1 | MEMB 225J100V | 2.2 | 100 | 5 | 7.2 | 11 | 6 | 0.6 | 1 | 5AA5 |
| MIB105J2A2AA220MA1 | MEMB 105J100V | 1.0 | 100 | 5 | 7.2 | 11 | 6 | 0.5 | 1 | 5AA5 |
| MIB104J2A2AA220MA1 | MEMB 104J100V | 0.10 | 100 | 5 | 7.2 | 6.5 | 2.5 | 0.5 | 1 | 5AA5 |
Part Number Code System
The part number code system defines the characteristics of each capacitor. Key elements include Series (MEF, MET, MEA, MEB, PPN, MPP, MPT, MPA, MPB, X1, XX1, XX2, MIB, MES, MPS, KPS, MPH, MHS, KHS, KES, PPS), Rated Capacitance (e.g., 102 for 0.001f, 105 for 1.0f), Rated Voltage (e.g., 1H for 50VDC, 2E for 250VDC), Pitch (P), and Forming Lead Shapes.
General Specifications
- Operating Temperature: -40 ~ +85 (+105 derated)
- Rated Voltage Derating: 1.5% per for +85 ~ +105
- Working Voltage: MEB (50 ~ 400VDC)
- Capacitance Range: MEB (0.001f ~ 1.0f)
- Capacitance Tolerance: 1% (F), 2%(G), 3%(H), 5%(J), 10%(K), 20%(M)
- Standard Testing Condition: 20 5, 65 5% RH
Testing Items & Characteristics
The specification details various electrical and mechanical tests including Insulation Resistance, Dielectric Strength, Bending Test, Surface Dipping Point, Vibration, Solderability, Dissipation Factor (DF), Capacitance Change, Appearance, Humidity Loading, and Temperature Cycle tests, adhering to IEC standards.
Testing Equipment
- Capacitance and DF: UAD TECH 1689 LCR Meter, TAI WAN ZENTECH LCR Meters (1062, 1063, 1075)
- Insulation Resistance (IR): DAN BRIDGE 602 Meter, ZENTECH 705 IR Meter
- Dielectric Strength (TV): ZENTECH 902, TAI WAN EXTECH 7450
- Automatic Sorting Machines: TAI WAN URANUS SORTING AUTOMATIC, TAI WAN WELL DELL SORTING AUTOMATIC
- Permissible Current to Frequency: CHROMA HF AC TESTER MODEL 11805, CHROMA DIGIT MULTIMETER 12061, CHROMA CAPACITOR LEAKAGE CURRENT / IR METER MODEL11200
Acceptable Quality Level (AQL)
AQL is according to MIL-STD-105E-II, by lot going inspection. AQL for Appearance, Dimensions, Mechanical Characteristics is 1.0. AQL for Electrical Characteristics (Cap, DF, TV, IR) is 0.065.
Soldering Suggestions
For wave soldering, capacitor body maximum temperature (Ts) should be < 120 and soldering time (ts) < 45 seconds. Pre-heating temperature (Tp) should be < 115. Specific time and temperature limits are provided based on product thickness and lead pitch.
Handling Notes
- Film capacitors should not pass into the SMD adhesive curing when used with SMD components. Leaded components should be assembled after SMD curing.
- Leaded film capacitors are not suitable for reflow soldering.
2410121458_JOEY-MIB105J2A2AA220MA1_C5373344.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
