JOEY ELECTRONICS CO., LTD. - SPECIFICATION OF PLASTIC FILM CAPACITOR FOR APPROVAL

This specification applies to capacitors of type "MEMB" (METALLIZED POLYESTER FILM CAPACITOR). These capacitors are designed for general use and feature a metallized polyester film element.

Product Attributes

• Brand: JOEY ELECTRONICS CO., LTD.
• Series: MEMB
• Material: Metallized Polyester Film
• Origin: Guangdong Province, Dongguan City, China
• Certifications: RoHS & WITHOUT HALOGEN

Technical Specifications

Part Number Code System

Series: MEF, PEN, MEF, MET, MEA, MEB, PPN, MPP, MPT, MPA, MPB, X1, XX1, XX2, MIB, MES, MPS, KPS, MPH, MHS, KHS, KES, PPS, VPF, VPB

Rated Capacitance:

• 102: 0.0010 µf
• 112: 0.0011 µf
• 122: 0.0012 µf
• 103: 0.010 µf
• 113: 0.011 µf
• 123: 0.012 µf
• 104: 0.100 µf
• 114: 0.110 µf
• 105: 1.0 µf

Rated Voltage:

• 1H: 50 VDC
• 1J: 63 VDC
• 2A: 100 VDC
• 2D: 200 VDC
• 2E: 250 VDC
• 2G: 400 VDC
• 2L: 450 VDC
• 2H: 500 VDC
• 2B: 520 VDC
• 2J: 630 VDC
• 2K: 800 VDC
• 3A: 1000 VDC
• 3B: 1200 VDC
• 3M: 1250 VDC
• 3C: 1500 VDC
• 3V: 1600 VDC
• 3W: 1800 VDC
• 3D: 2000 VDC
• 3E: 2500 VDC
• 3F: 3000 VDC
• A1: 300 VAC
• A2: 275 VAC
• A3: 100 VAC
• A4: 160 VAC
• A5: 200 VAC
• A6: 250 VAC
• A7: 450 VAC
• AE: 310 VAC
• A9: 330 VAC

Pitch Code (P mm):

• 5: 5
• 7.5: 7.5
• 10: 10
• 12.5: 12.5
• 15: 15
• 20: 20
• 22.5: 22.5
• 25: 25
• 27.5: 27.5
• 32.5: 32.5
• 35: 35
• 37.5: 37.5
• 42.5: 42.5
• 3: 3
• 4: 4
• 6: 6
• 7: 7
• 8: 8
• 9: 9
• 16: 16
• 21: 21
• 31.5: 31.5
• 43.5: 43.5

Forming Lead Shapes:

• L≥20 / P±1
• L±1 / P±1
• H1 ≤5.5 L≥20 / P±1
• H1 ≤4 L≥20 / P1±1
• L±1 / P±1
• H1 ≤5 L≥20 / P1±1
• L±1 / P±1
• H1 ≤5 L≥20 / P1±1
• L±1 / P±1
• H1 ≤5 L≥20 / P1±1
• P+0.8~-0.2
• P+0.8~-0.2
• P+0.8~-0.2
• P+0.8~-0.2
• Axial(L≥28)
• Axial˜soft wire

Note:

• H1 ≤ 5.5
• H1 ≤ 4
• H1 ≤ 5
• H1 ≤ 5.5

Capacitance Tolerance:

• F: ±1%
• G: ±2%
• H: ±3%
• J: ±5%
• K: ±10%
• M: ±20%

General Specifications

• Operating Temperature: -40 ~ +85 (+105)
• Rated Voltage Derating: 1.5% per for +85 ~ +105
• Working Voltage: MEB (50 ~ 400VDC)
• Capacitance Range: MEB (0.001µf~1.0µf)
• Capacitance Tolerance: ±1% (F), ±2%(G), ±3%(H), ±5%(J), ±10%(K), ±20%(M)
• Standard Testing Condition: Temperature: 20 ± 5, Humidity: 65±5%RH

Testing Equipment

• Capacitance and DF: UAD TECH 1689 LCR METER, TAI WAN ZENTECH LCR METERS (1062, 1063, 1075)
• Insulation Resistance (IR): DAN BRIDGE 602 METER, ZENTECH 705 IR METER
• Dielectric Strength (TV): ZENTECH 902, TAI WAN EXTECH 7450
• Automatic Sorting Machines: TAI WAN URANUS SORTING AUTOMATIC, TAI WAN WELL DELL SORTING AUTOMATIC
• Permissible Current to Frequency Characteristics: CHROMA HF AC TESTER MODEL 11805, CHROMA DIGIT MULTIMETER 12061, CHROMA CAPACITOR LEAKAGE CURRENT / IR METER MODEL 11200

Acceptable Quality Level (AQL)

• AQL is according to MIL-STD-105E-II, by lot going inspection.
• Appearance AQL: 1.0
• Dimensions AQL: 1.0
• Mechanical Characteristics AQL: 1.0
• Electrical Characteristics (CAP, DF, TV, IR) AQL: 0.065

Soldering Suggestions

Wave Soldering:

• Pre-heating Temperature (Tp): < 115
• Soldering Temperature (Ts): < 120
• Soldering Time (ts): < 45 s (for product thickness > 6mm)
• Soldering Time (ts): 5 s (for product thickness > 5mm and K ≥ 3.5mm)
• Soldering Time (ts): 3 s (for product thickness < 4.5mm or P < 7.5mm)

Note: Heat conducted to the element from wire lead and enclosure can cause deterioration. Ensure soldering within the specified temperature range.

Assembly Considerations

• When using SMD components with leaded ones, film capacitors should not pass into the SMD adhesive curing. Leaded components should be assembled after SMD curing.
• Leaded film capacitors are not suitable for reflow soldering.