Product Overview
JOEY ELECTRONICS CO., LTD. presents the MEMB series of plastic film capacitors, specifically metallized polyester film capacitors. These capacitors are designed for general-purpose use and are suitable for a wide range of electronic applications. They offer reliable performance with specified operating temperature ranges and voltage ratings.
Product Attributes
- Brand: JOEY ELECTRONICS CO., LTD.
- Series: MEMB
- Material: Metallized Polyester Film
- Origin: Guangdong Province, Dongguan City, China
Technical Specifications
| Joey Part No. | Customer Part No. | Type | Capacitance (f) | Rated Voltage | Pitch (mm) | Fig. | W (max) | H (max) | T (max) | d (0.05) | Remark |
| MIB154J2E2AA220MA1 | C4355451 | MEMB | 0.15 | 250VDC | 5 | 1 | 7.2 | 10 | 5 | 0.8 | 5AA5 |
| MIB222J2G2AA220MA1 | C4355452 | MEMB | 2.2 | 400VDC | 5 | 1 | 7.2 | 6.5 | 2.5 | 0.5 | 5AA5 |
| MIB225J2A2AA220MA1 | C5373345 | MEMB | 2.2 | 100VDC | 5 | 1 | 7.2 | 11 | 6 | 0.6 | 5AA5 |
| MIB105J2A2AA220MA1 | C5373344 | MEMB | 1.0 | 100VDC | 5 | 1 | 7.2 | 11 | 6 | 0.5 | 5AA5 |
| MIB104J2A2AA220MA1 | C5373343 | MEMB | 0.10 | 100VDC | 5 | 1 | 7.2 | 6.5 | 2.5 | 0.5 | 5AA5 |
General Specifications
Operating Temperature: -40 ~ +85 (+105 with derating)
Rated Voltage Derating: 1.5% per for +85 ~ +105
Capacitance Tolerance: 1% (F), 2% (G), 3% (H), 5% (J), 10% (K), 20% (M)
Construction: Element (Metallized Polyester Film), Metals (SN.ZN.SB.CU), Epoxy Resin & Wax, Plastic Case, Wire.
Marking: Work Voltage, Capacitance Tolerance, Capacitance.
Standard Testing Condition: Temperature 20 5, Humidity 65 5% RH.
Testing Equipment
- Capacitance and DF: UAD TECH 1689 LCR METER, TAI WAN ZENTECH LCR METERS (1062, 1063, 1075)
- Insulation Resistance (IR): DAN BRIDGE 602 METER, ZENTECH 705 IR METER
- Dielectric Strength (TV): ZENTECH 902, TAI WAN EXTECH 7450
- Automatic Sorting Machines: TAI WAN URANUS SORTING AUTOMATIC, TAI WAN WELL DELL SORTING AUTOMATIC
- Permissible Current to Frequency: CHROMA HF AC TESTER MODEL 11805, CHROMA DIGIT MULTIMETER 12061, CHROMD CAPACITOR LEAKAGE CURRENT / IR METER MODEL11200
Acceptable Quality Level (AQL)
AQL is according to MIL-STD-105E-II, by lot going inspection.
- Appearance AQL: 1.0
- Dimensions AQL: 1.0
- Mechanical Characteristics AQL: 1.0
- Electrical Characteristics (CAP, DF, TV, IR) AQL: 0.065
Soldering Suggestions
For wave soldering, capacitor body maximum temperature (Ts) should be < 120 and soldering time (ts) < 45s. Pre-heating temperature (Tp) should be < 115. Specific time and temperature limits vary based on product thickness and pitch.
Leaded film capacitors are not suitable for reflow soldering.
2410121458_JOEY-MIB154J2E2AA220MA1_C4355451.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
