<
>
Specifications
Tolerance:
±5%
Voltage Rating:
630V
Capacitance:
2.2uF
Operating Temperature:
-40℃~+85℃
Mfr. Part #:
MPX225J2JBAAB20MA1
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
MPX225J2JBAAB20MA1
Product Description
JOEY ELECTRONICS CO., LTD. - Plastic Film Capacitor Specification Approval
This specification approval document outlines the details for the MPX series of plastic film capacitors manufactured by JOEY ELECTRONICS CO., LTD. for Shenzhen Lichuang E-commerce Co., Ltd. The MPX series, specifically metalized polypropylene-zinc-aluminum film capacitors, are designed for AC voltage reduction applications.
Product Attributes
- Brand: JOEY ELECTRONICS CO., LTD.
- Origin: CHINA P.R.C
- Certifications: RoHS, REACH, Without Halogen (as required)
Technical Specifications
| Part Number | Series | Rated Capacitance (µf) | Rated Voltage (VDC) | Pitch (mm) | Lead Shape | Dimensions (W x H x T mm) | Lead Diameter (Ø) | Note |
|---|---|---|---|---|---|---|---|---|
| MPX225J2JBAAB20MA1 | MPX | 0.22 | 630 | 7.5 | L≥20 | 30 x 19.5 x 11 | 0.8 | L≥20 |
General Specifications
| Parameter | Specification |
|---|---|
| Applicable Scope | MPX series (Capacitor type "MPX" (Resistor-Capacitor Voltage Divider)) (Metalized Polypropylene-Zinc-Aluminum Film Capacitor) for capacity attenuation (within 5% annual capacity attenuation when 250VAC, 50K HZ is applied long-term). |
| Operating Temperature | -40 ~ +85 (+105) (Operation below rated voltage is required for +85~+105: voltage drops 1.5% for every 1 increase) |
| Rated Voltage | MPX (50 ~ 1000VDC) |
| Capacitance Range | MPX (0.01µf ~ 10.0µf) |
| Capacitance Tolerance | +1% (F), +2%(G), +3%(H), +5%(J), +10%(K), +20%(M) |
| Structure | A: Original film (Metalized Polypropylene Film - Zinc Aluminum) B: Alloy (Tin, Zinc, Antimony, Copper) C: Epoxy Resin and Wax D: Leads |
| Marking | Capacitance Tolerance, Capacitance, Manufacturer's Name and Trademark ( "W" for registered trademark), Working Voltage, Type Name. |
| Standard Test Conditions | Test Temperature: 20+5, Humidity: 65+5%RH |
| Storage Conditions | Temperature: MAX. 35, Relative Humidity: MAX. 80% (in original package). Storage Period: Loose: 12 months MAX. |
Electrical Characteristics
| Test Item | Characteristic | Test Method |
|---|---|---|
| Dielectric Strength (TV) | No breakdown or flashover between terminals. No more than 15mA change between body and terminals. | Test voltage: 150% of rated voltage for 2 seconds. |
| Insulation Resistance (IR) | C<.33µf> 30,000M or more 1.0µf>C>.33µf> 10,000M or more C>1.0µf> 5,000M or more | Test voltage: 100VDC. Test time: 60 + 5 seconds. |
| Capacitance | Refer to page 3. | Frequency: 1kHz, Test voltage: 1V, Test temperature: 20 + 5. |
| Dissipation Factor (DF) | 0.1% (maximum) at 1kHz. | Test voltage: 1V, Test temperature: 20 + 5. |
| Tensile Strength | 0.5mm leads: 0.5KG for 10 seconds. 0.6mm leads: 0.5KG for 10 seconds. 0.8mm leads: 0.5KG for 10 seconds. 1.0mm leads: 1.0KG for 20 seconds. | No change in electrical and mechanical characteristics. |
| Bending Strength | 0.5mm leads: 5N: 4*90 bends. 0.6 and 0.8mm leads: 5N: 4*90 bends. 1.0mm leads: 5N: 4*90 bends. | No change in electrical and mechanical characteristics. According to IEC 68-2-21, TEST UB. |
| Vibration Resistance | No change in electrical and mechanical characteristics. | Frequency range: 10-55-10Hz, 2 hours. Direction*3 directions. According to IEC 68-2-6, TEST FC&FD. |
| Solderability | Lead solder coverage rate of 95% or more. | Soldering temperature: 245 + 5, Time: 2 + 0.5SEC. According to IEC68-2-20. |
| High Temperature Load Test | Capacitance change: < + 3% Dissipation Factor: 0.1% (MAX) AT 1KHZ | 125% rated voltage for 1000 + 48/0 hours at 85 + 2. Insulation Resistance: C < 0.33µf> 30G, 1.0µf > C > 0.33µf > 10 G, C > 1.0µf > 5G. |
Soldering Suggestions
For PP (Polypropylene) capacitors:
During pre-heating: Tp < 115
During soldering: Ts < 120, ts < 45s
Manual soldering recommended tip temperature: < 360, contact time ≤ 3 seconds.
2410121253_JOEY-MPX225J2JBAAB20MA1_C19269291.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
