<
>
Specifications
Tolerance:
±5%
Voltage Rating:
400V
Capacitance:
2.2nF
Operating Temperature:
-40℃~+105℃
Mfr. Part #:
MIB222J2G2AA220MA1
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
MIB222J2G2AA220MA1
Product Description
JOEY ELECTRONICS CO., LTD. Plastic Film Capacitor Specification Approval
This specification applies to capacitors of type "MEMB" (Metallized Polyester Film Capacitor). These capacitors are designed for various applications requiring stable capacitance and reliable performance within a specified operating temperature range.
Product Attributes
- Brand: JOEY ELECTRONICS CO., LTD.
- Series: MEMB
- Material: Metallized Polyester Film (Element), SN.ZN.SB.CU (Metals), Epoxy Resin & Wax (Encapsulation), Plastic Case, Wire (Leads)
- Origin: Guangdong Province, Dongguan City, China
- Certifications: RoHS & Without Halogen
Technical Specifications
| Joey Part No. | Item | Capacitance (f) | Rated Voltage (VDC) | Width (W) (mm) | Height (H) (mm) | Thickness (T) (mm) | Lead Diameter (d) (mm) | Pitch (P) (mm) | Fig. | Remark |
|---|---|---|---|---|---|---|---|---|---|---|
| C4355451 | MIB154J2E2AA220MA1 | 0.15f | 250V | 7.2 | 10 | 5 | 0.8 | 5 | 1 | 5AA5 |
| C4355452 | MIB222J2G2AA220MA1 | 0.22f | 400V | 7.2 | 6.5 | 2.5 | 0.5 | 5 | 1 | 5AA5 |
| C5373345 | MIB225J2A2AA220MA1 | 2.2f | 100V | 7.2 | 11 | 6 | 0.6 | 5 | 1 | 5AA5 |
| C5373344 | MIB105J2A2AA220MA1 | 1.0f | 100V | 7.2 | 11 | 6 | 0.5 | 5 | 1 | 5AA5 |
| C5373343 | MIB104J2A2AA220MA1 | 0.10f | 100V | 7.2 | 6.5 | 2.5 | 0.5 | 5 | 1 | 5AA5 |
Part Number Code System
The part number code system defines various parameters of the capacitor, including series, rated capacitance, rated voltage, pitch, and forming lead shapes.
General Specifications
- Operating Temperature: -40 to +85 (+105 with derating)
- Rated Voltage Derating: 1.5% per for +85 to +105
- Working Voltage Range (MEB): 50VDC to 400VDC
- Capacitance Range (MEB): 0.001F to 1.0F
- Capacitance Tolerance: 1% (F), 2% (G), 3% (H), 5% (J), 10% (K), 20% (M)
Testing Conditions
- Standard Testing Conditions: Temperature 205, Humidity 655%RH
Testing Items & Characteristics
- Insulation Resistance (IR): Varies based on capacitance (e.g., C < 0.33F > 15,000M)
- Dielectric Strength (TV): 150% Rated Voltage for 2 seconds, not exceeding 15mA
- Dissipation Factor (DF): 1.0% (MAX) at 1KHz
- Appearance: No visible change
- Solderability: Meets IEC68-2-20 standards
- Mechanical Tests: Bending, Vibration, Humidity, Temperature Cycling, etc.
Testing Equipment
- Capacitance and DF: LCR Meters (UAD TECH, TAI WAN ZENTECH)
- Insulation Resistance (IR): IR Meters (DAN BRIDGE, ZENTECH)
- Dielectric Strength (TV): High Voltage Testers (ZENTECH, EXTECH)
- Auto Sorting Machines: (TAI WAN URANUS, TAI WAN WELL DELL)
- HF AC Tester: CHROMA Programmable HF AC Tester Model 11805
Acceptable Quality Level (AQL)
- AQL: According to MIL-STD-105E-II, by lot inspection.
- Appearance: AQL: 1.0
- Dimensions: AQL: 1.0
- Mechanical Characteristics: AQL: 1.0
- Electrical Characteristics (CAP, DF, TV, IR): AQL: 0.065
Soldering Suggestions
- Wave Soldering: Capacitor body maximum temperature Ts < 120, soldering time ts < 45s. Pre-heating temperature Tp < 115. Specific times depend on product thickness.
- Leaded film capacitors are not suitable for reflow soldering.
- When using SMD and leaded components together, film capacitors should not pass through the SMD adhesive curing process. Leaded components should be assembled after SMD curing.
2410121458_JOEY-MIB222J2G2AA220MA1_C4355452.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
