<
>
Specifications
Tolerance:
±10%
Voltage Rating:
100V
Capacitance:
4.7uF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEF475K100D01
Package:
Through Hole,P=22.5mm
Key Attributes
Model Number:
MEF475K100D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MEF Capacitor, specifically the 2.2/4.7uF K 100VDC model, is a high-reliability capacitor designed for low-frequency applications. It features a non-inductive construction and self-healing properties, making it suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Material: Polyester film dielectric, vacuum evaporated metal electrodes, epoxy resin coating, tinned wire leads
- Color: Brown (for specific models)
- Certifications: RoHS 2.0 compliant
Technical Specifications
| Specification | Description | Value | Test Conditions | ||||||
| Capacitance | Rated Capacitance | 4.7uF, 2.2uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||||
| Capacitance Tolerance | K=10% | ||||||||
| Voltage | Rated voltage | 100VDC | 1.6*UR Unit:VDC (5 S at 20) | ||||||
| Voltage Proof | No permanent breakdown and flashover | ||||||||
| Dissipation Factor (tangent of loss) | DF0.8% (C1.0uF) | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |||||||
| DF1.0% C>1.0uF | |||||||||
| Insulation Resistance | C0.33uF | IR15000M | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||||
| C0.33uF | IR*C3000S | ||||||||
| Endurance | C/C8%; | 1000 hours with 125% of rated voltage at 85. | |||||||
| DF0.30% (C1uF); DF0.5% (C1uF) | |||||||||
| IR 50% of the specified value; | |||||||||
| Climatic Catalogue | 40/85/21 | ||||||||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | |||||||
| 75% | |||||||||
| Heat shock | C/C5% | solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | |||||||
| DF1.2* | |||||||||
| Lead tensile strength | Pull2.2 LBS, time: 5 sec | ||||||||
| Lead bending strength | Load of lead1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | |||||||
| Vibration | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each directions with a total of 6 hours | ||||||||
| Reference Standard | IEC384-2 grade 1; SJ/T 10787-1996 | ||||||||
| Construction | Dielectric | Polyester film | |||||||
| Construction | Electrodes | Vacuum evaporated metal | |||||||
| Construction | Coating | Epoxy resin, fire retardant on request | |||||||
| Construction | Leads | Radial leads of tinned wire | |||||||
| Construction | Terminal contact | Electrically welded | |||||||
| Feature | High reliable and superior performance in low frequency application, Non-inductive construction, Self-healing | ||||||||
| Application | Filter and noise suppression circuit, Pulse, logic and timing circuit, DC-blocking, by-passing and signal coupling in general communication equipment | ||||||||
| Marking | Rated capacitance | e.g., 475 | |||||||
| Rated voltage | e.g., 100VDC | ||||||||
| Capacitance tolerance | e.g., K | ||||||||
| Manufacturer's symbol | JIMSON (JS) | ||||||||
| Outline Drawing | Model | CAP | Color | W Max | H Max | T Max | P 1.0 | D 0.05 | L +5/-10 |
| Outline Drawing | 475K100D01 | 4.7uF | Brown | 26.0 | 21.0 | 10.0 | 22.5 | 0.8 | 25.0 |
| Outline Drawing | 225K100D06 | 2.2uF | Brown | 23.0 | 16.0 | 10.0 | 20.0 | 0.8 | 25.0 |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | 4S | ||||||
| Pre-heating | 105 | 1min | |||||||
| Soldering | 270 | 4S | |||||||
| Storage Environment and Conditions | Storage Environment | Temperature 30, Humidity 70% (MBB not open for 24 months) | |||||||
| Storage Condition | Avoid hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. |
2409291103_Jimson-MEF475K100D01_C434216.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
