<
>
Specifications
Tolerance:
±5%
Capacitance:
100nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MPC104J630D04
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MPC104J630D04
Product Description
Product Overview
JIMSON ELECTRONICS (XIAMEN) CO.,LTD. presents the MPC series capacitors, designed for a wide range of electronic applications. These capacitors feature non-inductive construction, self-healing properties, high moisture resistance, and excellent physical and environmental adaptability. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC blocking, by-passing, and signal coupling in communication equipment. Additionally, they are widely used in power electronic equipment for absorbing peak voltage and current during switching device turn-off.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Marking: UV ink or laser engraving (Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol)
- Packaging Marking: Product model, rated capacitance and voltage, production date and factory location, manufacturer's name
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions | ||||
| 1. SPECIFIC REFERENCE DATA | ||||||
| Capacitance (Rated Capacitance) | 0.01-60uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||
| Capacitance Tolerance | J=5% / K=10% | |||||
| Voltage (Rated Voltage) | 250-2000VDC | |||||
| Voltage Proof | No permanent breakdown or arcing | 1.6*Ur (1 minute at 20) | ||||
| Dissipation Factor (DF) | DF0.1% | (at 20, 1KHz) | ||||
| DF0.2% | C10uF, Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max. | |||||
| Insulation Resistance (IR) | C0.33uF IR30000M | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||
| C 0.33uF IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||||
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test | ||||
| Climatic Catalogue | 40/85/21 | |||||
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Heat Shock | C/C5% DF1.2*specified value. Capacitor appearance should be free from visible damage after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Lead Tensile Strength | No damage to leads | Pull: 2.2 LBS, Time: 5 sec | ||||
| Lead Bending Strength | No damage to leads | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | ||||
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | ||||
| 3. FEATURE | ||||||
| Non-inductive construction and self-healing | ||||||
| High property moisture resistance | ||||||
| Super physical and environmental characteristics | ||||||
| 4. APPLICATION | ||||||
| Filter and noise suppression circuit | ||||||
| Pulse, logic, and timing circuit | ||||||
| Dc-blocking, by-passing and signal coupling in general communications equipment | ||||||
| Widely used in power electronic equipment when the peak voltage, peak current Absorption protection | ||||||
| 6. EXPLANATION OF IMPORTANT TERMINOLOGY | ||||||
| Rated capacitance | Expressed by a three-digit number (e.g., 224 = 220,000pF or 0.22uF) | Unit: PF | ||||
| Capacitance tolerance | Symbol: F=1%, G=2%, J=5%, K=10%, M=20%, N=30% | |||||
| Dissipation factor | Measure of power loss in a capacitor under alternating voltage. Measured at 20 and 1KHz. | tgP/Q | ||||
| Insulation resistance | Ratio between applied DC voltage and leakage current. Measured at 20 and RH65%. | Expressed in megohm (low capacitance) or time constant (high capacitance). | ||||
| Self-healing | Ability of metallized film capacitors to isolate a weak point after a breakdown. | |||||
| 7. WEATHERABILITY TESTING METHODS | ||||||
| High temperature | Capacitance drift: +5% max of initial value; DF: < 0.2% at 1KHz | 85, after thermal stability | ||||
| Low temperature | Capacitance drift: -5% max of initial value; DF: < 0.15% at 1KHz | -40, after thermal stability | ||||
| Humidity | Capacitance drift: +10% max of initial value; IR: > 50% of initial value; DF: < 0.2% | 85, 85% RH for 10001% hrs, then 16 hrs at room conditions. | ||||
| 10. DIMENSION | ||||||
| SYMBOL | CAP (uF) | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | REMARKS |
| MPC103J2000D02 | 0.01 | 18*12*6 | L25 | P15 | CP0.6 | YELLOW |
| MPC104J630D04 | 0.1 | 18*18*10 | L25 | P15 | CP0.8 | YELLOW, Double film |
| MPC104K520D01 | 0.1 | 13*12*6 | L25 | P10 | CP0.6 | YELLOW |
| MPC105J1000D01 | 1.0 | 32*20*11 | L3.8 | P27.5 | CP0.8 | YELLOW |
| MPC105K1000D02 | 1.0 | 41.5*31.4*24 | L25 | P37.5 | CP1.0 | YELLOW |
| MPC105K450D01 | 1.0 | 18*18*10 | L23 | P15 | CP0.8 | YELLOW |
| MPC106J650D01 | 10.0 | 41.5*24*19 | L21 | P37.5 | CP0.8 | YELLOW, Four leads, B=12.7 |
| MPC155K100D01 | 1.5 | 15*17*7 | L20 | P12.5 | CU0.8 | YELLOW |
| MPC155K450D01 | 1.5 | E8 | L25 | P22.5 | CP0.8 | YELLOW |
| MPC156K1200D01 | 15.0 | 42.5*38*25 | L21 | P37.5 | CU0.8 | YELLOW |
| MPC156K900D01 | 15.0 | 42*36*23 | L25 | P37.5 | CU0.8 | BLACK, Yellow glue, Black case |
| MPC224J630A01 | 0.22 | 18*16*10 | L25 | P15 | CP0.6 | YELLOW |
| MPC226K1200D01 | 22.0 | 58*40*28 | L21 | P52.5 | CU1.0 | YELLOW, Box type |
| MPC332J1000D02 | 0.0033 | 13*9*4 | L25 | P10 | CP0.6 | YELLOW |
| MPC332J2000D01 | 0.0033 | 18*12*6 | L25 | CP0.6 | L25 | GRAY, Yellow glue, Double film |
| MPC333K1000A01 | 0.033 | 18*12*6 | L25 | P15 | CP0.8 | YELLOW |
| MPC335K250D01 | 3.3 | 31*25*14 | L25 | P27.5 | CP0.8 | YELLOW |
| MPC335K450D01 | 3.3 | 32*20*11 | L25 | P27.5 | CP0.8 | YELLOW |
| MPC473J630D05 | 0.047 | 18*12*6 | L3.8 | P15 | CP0.6 | YELLOW |
| MPC504J1000D01 | 0.05 | 38*30*20 | L21 | P30.5 | CP0.8 | BLACK, Yellow glue, Black case |
| MPC504J1000D02 | 0.05 | 32*33*18 | L3.5 | P27.5 | CU1.0 | YELLOW, Irregular box type |
| MPC565M250D01 | 5.6 | 31*25*14 | L30 | P27.5 | CP0.8 | YELLOW |
| MPC605K1200D01 | 6.0 | 41.5*31.4*24 | L25 | P37.5 | CP1.0 | YELLOW |
| MPC606K500D01 | 60.0 | 42.5*50*35 | L21 | P37.5 | CP0.8 | YELLOW, Four leads, B=20.3 |
| MPC805K1000D01 | 8.0 | 32*37*22 | L23 | P27.5 | CP0.8 | YELLOW |
| 11. CAUTION | ||||||
| Soldering Suggestion | Maximum Soldering Temperature: 270, Time: 4S, Pre-heating: 105, 1min | |||||
| Salt fog test | The lead wire of this product is tin-plated copper-coated steel. Please test the salt mist after wave soldering. | |||||
| 12. STORAGE ENVIRONMENT AND CONDITIONS | ||||||
| Storage Environment | Temperature 30, Humidity 70%. MBB (Moisture Barrier Bag) not opened ensures 24 months storage. | |||||
| Storage Condition | Store in air, avoiding exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. | |||||
2410121441_Jimson-MPC104J630D04_C7431935.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
