JIMSON ELECTRONICS (XIAMEN) CO.,LTD. - MPC Series Capacitors
The JIMSON MPC series capacitors are non-inductive, self-healing capacitors featuring high moisture resistance and excellent physical and environmental characteristics. They are designed for various applications including filter and noise suppression circuits, pulse, logic, and timing circuits, DC-blocking, by-passing, and signal coupling in communication equipment. They are also widely used in power electronic equipment for peak voltage and current absorption protection.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (Arc spot welding)
- Marking Method: UV ink or laser engraving
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions |
| Capacitance | 0.01-60uF | Rated Capacitance |
| J=5% / K=10% | Capacitance Tolerance | |
| Voltage | 250-2000VDC | Rated Voltage |
| 1.6*U (1 minute at 20, no permanent breakdown or flashover) | Voltage Proof | |
| Dissipation Factor (DF) | DF0.1% (for C10uF) | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. (at 20) |
| DF0.2% (for C<10uF) | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. (at 20) | |
| Insulation Resistance (IR) | IR30000M (for C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| IR*C5000S (for C>0.33uF) | ||
| Endurance | C/C5%; DF0.40%; IR50% of specified value | 1000 hours with 125% of rated voltage at 85. After the test. |
| Climatic Catalogue | 40/85/21 | |
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Appearance without damage | ||
| Heat Shock | C/C5%, DF1.2*specified value. Appearance without visible damage. | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS, time: 5 sec |
| Lead Bending Strength | Appearance without damage | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | Appearance without visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
Dimensions
| Symbol | CAP (uF) | Color | W*H*T (mm) | L (mm) | P (mm) | D (mm) | Remarks |
| MPC103J2000D02 | 0.01 | YELLOW | 18*12*6 | 25 | 15 | 0.6 | L25 P15 CP0.6 |
| MPC104J630D04 | 0.1 | YELLOW | 18*18*10 | 25 | 15 | 0.8 | MPC104J630D04 |
| MPC104K520D01 | 0.1 | YELLOW | 13*12*6 | 25 | 10 | 0.6 | MPC104K520D01 |
| MPC105J1000D01 | 1.0 | YELLOW | 32*20*11 | 25 | 27.5 | 0.8 | MPC105J1000D01 |
| MPC105K1000D02 | 1.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | 1.0 | MPC105K1000D02 |
| MPC105K450D01 | 1.0 | YELLOW | 18*18*10 | 23 | 15 | 0.8 | MPC105K450D01 |
| MPC106J650D01 | 10.0 | YELLOW | 41.5*24*19 | 21 | 37.5 | 0.8 | B=12.7 |
| MPC155K100D01 | 1.5 | YELLOW | 15*17*7 | 20 | 12.5 | 0.8 | MPC155K100D01 |
| MPC155K450D01 | 1.5 | YELLOW | E8 | 25 | 22.5 | 0.8 | MPC155K450D01 |
| MPC156K1200D01 | 15.0 | YELLOW | 42.5*38*25 | 21 | 37.5 | 0.8 | MPC156K1200D01 |
| MPC156K900D01 | 15.0 | BLACK | 42*36*23 | 25 | 37.5 | 0.8 | |
| MPC224J630A01 | 0.22 | YELLOW | 18*16*10 | 25 | 15 | 0.6 | MPC224J630A01 |
| MPC226K1200D01 | 22.0 | YELLOW | 58*40*28 | 21 | 52.5 | 1.0 | |
| MPC332J1000D02 | 0.0033 | YELLOW | 13*9*4 | 25 | 10 | 0.6 | MPC332J1000D02 |
| MPC332J2000D01 | 0.0033 | YELLOW | 18*12*6 | 25 | 0.6 | L25 | |
| MPC333K1000A01 | 0.033 | YELLOW | 18*12*6 | 25 | 15 | 0.8 | |
| MPC335K250D01 | 3.3 | YELLOW | 31*25*14 | 25 | 27.5 | 0.8 | MPC335K250D01 |
| MPC335K450D01 | 3.3 | YELLOW | 32*20*11 | 25 | 27.5 | 0.8 | MPC335K450D01 |
| MPC473J630D05 | 0.047 | YELLOW | 18*12*6 | 3.8 | 15 | 0.6 | MPC473J630D05 |
| MPC504J1000D01 | 0.05 | BLACK | 38*30*20 | 21 | 30.5 | 0.8 | |
| MPC504J1000D02 | 0.05 | YELLOW | 32*33*18 | 3.5 | 27.5 | 1.0 | |
| MPC565M250D01 | 5.6 | YELLOW | 31*25*14 | 30 | 27.5 | 0.8 | MPC565M250D01 |
| MPC605K1200D01 | 6.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | 1.0 | MPC605K1200D01 |
| MPC606K500D01 | 60.0 | YELLOW | 42.5*50*35 | 21 | 37.5 | 0.8 | B=20.3 |
| MPC805K1000D01 | 8.0 | YELLOW | 32*37*22 | 23 | 27.5 | 0.8 | MPC805K1000D01 |
Caution
Soldering Suggestion
Maximum Soldering Temperature: 270, Time: 4S. Pre-heating: 105, 1min.
Salt Fog Test Conditions
The lead wire of this product is tin-plated copper-coated steel. Please test the salt mist after wave peak welding.
Storage Environment and Conditions
Storage Environment: Temperature 30, Humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures 24 months of storage.
Storage Condition: Due to atmospheric components like hydrogen chloride, hydrogen sulfide, and sulfuric acid, the solderability of leads may degrade if stored in air. Store under the conditions specified in section 12.1, avoiding exposure to high temperature and humidity.
2410121441_Jimson-MPC332J2000D01_C7431948.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
