<
>
Specifications
Tolerance:
±5%
Voltage Rating:
100V
Capacitance:
10nF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEB103J100D01
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
MEB103J100D01
Product Description
Product Overview
The JIMSON MEB series capacitors offer a capacitance range from 0.001uF to 1.0uF with a rated voltage of 100VDC. These capacitors are designed for coupling, filtering, noise suppression, and bypassing applications in DC and pulse circuits. Key advantages include small size, low loss, good stability, and excellent self-healing properties for a long operational life.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Description | Value | Test Conditions |
| Capacitance | Rated Capacitance: 0.001uF~1.0uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance: J=5%, K=10% | ||
| Voltage | Rated Voltage: 100VDC | |
| Voltage Proof: 1.6*UR (1 minute at 20), No permanent breakdown or flashover | ||
| Dissipation Factor (DF) | DF1.0% | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Insulation Resistance (IR) | C0.33uF: IR5000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| C0.33uF: IR*C3000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |
| Endurance | C/C5%; DF0.20% | 1000 hours with 125% of rated voltage at 85. After the test: C0.1uF IR9000 M, C1uF IR 50% of the specified value |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | C/C5%, DF1.2*specified value. Capacitor appearance should be free from visible damage after the test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead tensile strength: No visible damage to appearance | Pull: 2.2 LBS, Time: 5 sec | |
| Lead bending strength: No visible damage to appearance | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC60384-2, GB7322 |
2410121458_Jimson-MEB103J100D01_C434194.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
