<
>
Specifications
Tolerance:
±5%
Voltage Rating:
100V
Capacitance:
4.7nF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
PEI472J100D01
Package:
Through Hole,P=3mm
Key Attributes
Model Number:
PEI472J100D01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. PEI capacitors are designed for DC and pulsing circuits in a wide range of electronic equipment, including radios and TVs. They are also suitable for high-voltage applications such as energy-saving lamps and mosquito-killer lamps. These capacitors feature small size, light weight, low cost, and a small dissipation factor due to direct lead welding to electrodes. The epoxy resin vacuum-dipped construction enhances mechanical strength and humidity resistance.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Customer:
- Product Name: Capacitor
- Type: PEI
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire
- Terminal Contact: Electrically welded
- Reference Standards: IEC384-11, SJ/T 10786-1996
Technical Specifications
| Parameter | Description | Value | Test Conditions | ||||
| Capacitance | Rated Capacitance (Nominal Values) | 0.001uF, 0.0022uF, 0.0047uF, 0.0056uF, 0.0068uF, 0.01uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||
| Capacitance Tolerance | J=5% | ||||||
| Voltage | Rated Voltage | 100VDC | |||||
| Voltage Proof | Withstand Voltage | No permanent breakdown or flashover | 2.0*UR Unit:VDC (5 S at 20) | ||||
| Dissipation Factor (tangent of loss) | 1.0% | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |||||
| Insulation Resistance | IR | 30000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||
| Endurance | C/C5%; DF1%; IR 50% of the specified value | 2000 hours with 140% of rated voltage at 85. | |||||
| Climatic Catalogue | 40/85/21 | ||||||
| Solder Ability | Solder coverage | At least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Heat Shock | C/C5%, DF1.2*specified value. No visible damage to capacitor appearance after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |||||
| Lead Tensile Strength | No visible damage to appearance | Pull: 2.2 LBS | Time: 5 sec | ||||
| Lead Bending Strength | No visible damage to leads | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | ||||
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions | Time: 2 hours each direction with a total of 6 hours | ||||
| Marking (Capacitor) | Rated capacitance, Rated voltage, Capacitance tolerance | e.g., 102, 100V, J | |||||
| Marking (Package) | Product type, rated capacitance and voltage, date of manufacture, location of manufacture, manufacturer's name | ||||||
| Dimensions (mm) | W 1.0 | H 1.5 | T 1.0 | P 1.0 | D 0.05 | L MIN | |
| 102J100D01 (0.001uF) | 5.0 | 9.5 | 2.5 | 3.0 | 0.5 | 10.0 | Green |
| 103J100D01 (0.01uF) | 6.0 | 9.0 | 3.5 | 5.0 | 0.5 | 10.0 | Green |
| 222J100D01 (0.0022uF) | 5.0 | 9.5 | 3.0 | 3.0 | 0.5 | 10.0 | Green |
| 472J100D01 (0.0047uF) | 5.5 | 10.0 | 3.5 | 3.0 | 0.5 | 10.0 | Green |
| 562J100D01 (0.0056uF) | 5.0 | 9.5 | 3.5 | 3.0 | 0.5 | 10.0 | Green |
| 682J100D01 (0.0068uF) | 5.0 | 9.5 | 3.5 | 3.0 | 0.5 | 10.0 | Green |
2410121458_Jimson-PEI472J100D01_C434416.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
