Product Overview
The JIMSON MEA series capacitor offers high capacitance in a compact, non-inductive design with excellent moisture resistance and self-healing properties. It is suitable for various electronic applications including coupling, decoupling, by-passing, timing circuits, automatic control systems, communication equipment, charging/discharging, lighting, noise suppression, and frequency modulation.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Mylar tape with epoxy resin sealing
- Leads: Solder-plated copper-clad wire
- Terminal Contact: Electrically welded
- Color: Yellow
- Certifications: RoHS 2.0 compliant
Technical Specifications
| Parameter | Description | Value | Test Conditions | ||||
| Capacitance | Rated Capacitance | 0.1uF~10uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||
| Capacitance Tolerance | K=10% | ||||||
| Voltage | Rated Voltage | 250VDC | 1.6*UR Unit:VDC (5 S at 20) | ||||
| Voltage Proof | No permanent breakdown or arcing | ||||||
| Dissipation Factor (DF) | DF0.8% (C1.0uF) | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |||||
| DF1.0% (C>1.0uF) | |||||||
| Insulation Resistance (IR) | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||
| C0.33uF | IR*C3000S | ||||||
| Endurance | C/C | 8% | 1000 hours with 125% of rated voltage at 85. | ||||
| DF | 0.30% (C1uF); 0.50% (C1uF) | ||||||
| IR | 50% of the specified value | ||||||
| Climatic Catalogue | 40/85/21 | ||||||
| Solderability | Solder coverage | 75% of lead circumference | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body | ||||
| Lead tensile strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec | |||||
| Heat Shock | C/C | 5% | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from bottom of body | ||||
| DF | 1.2*specified value | ||||||
| Lead bending strength | No visible damage | Load of lead: 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | ||||
| Vibration | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |||||
| Reference Standard | IEC384-2 grade 1; SJ/T 10873-1996 | ||||||
| Dimensions (Unit: mm) | |||||||
| Model | Capacitance | W MAX | H MAX | T MAX | P 1.0 | D 0.05 | L 5.0 |
| 104K250D01 | 0.1uF | 16.0 | 7.5 | 4.2 | 16.0 | 0.6 | 40.0 |
| 224K250D01 | 0.22uF | 16.0 | 9.0 | 5.0 | 16.0 | 0.6 | 40.0 |
| 474K250D01 | 0.47uF | 21.0 | 10.5 | 6.5 | 21.0 | 0.8 | 40.0 |
| 105K250D01 | 1.0uF | 26.0 | 12.5 | 8.0 | 26.0 | 0.8 | 40.0 |
| 225K250D02 | 2.2uF | 32.0 | 16.5 | 9.0 | 32.0 | 0.8 | 40.0 |
| 335K250D01 | 3.3uF | 32.0 | 16.5 | 10.5 | 32.0 | 0.8 | 38.0 |
| 475K250D01 | 4.7uF | 32.0 | 20.6 | 11.2 | 32.0 | 0.8 | 35.0 |
| 106K250D02 | 10uF | 46.0 | 25.0 | 14.0 | 46.0 | 0.8 | 40.0 |
Caution
Soldering Suggestion
Maximum Soldering Temperature: Pre-heating 105 1min, Soldering 270 4S
Storage Environment and Conditions
Storage Environment: Store at temperature 30, humidity 70%. Unopened MBB (Moisture Barrier Bag) ensures a 24-month storage period.
Storage Condition: Due to atmospheric contaminants (hydrogen chloride, hydrogen sulfide, sulfuric acid, etc.), solderability of terminations may degrade when stored in air. Products must not be exposed to high temperature and high humidity; store under the specified environment conditions.
2410121458_Jimson-MEA105K250D01_C434384.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
