<
>
Specifications
Tolerance:
±5%
Capacitance:
22nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MEA223J480A01
Key Attributes
Model Number:
MEA223J480A01
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MEA series capacitor is a non-inductive, self-healing metallized film capacitor designed for low-frequency applications. It offers high reliability and superior performance, making it suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in general communication equipment.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire
- Terminal Contact: Electrically welded
- Color: Yellow
- Certifications: RoHS Compliant (RoHS 2.0)
Technical Specifications
| Parameter | Description | Value | Test Conditions |
|---|---|---|---|
| Capacitance | Rated Capacitance | 0.022uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | J=5% | ||
| Voltage | Rated voltage | 480VAC | 1.6*UR Unit:VDC (5 S at 20) |
| Voltage Proof | No permanent breakdown or arcing | ||
| Dissipation Factor (tangent of loss) | DF0.8% (C1.0uF) | DF1.0% (C>1.0uF) | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Insulation Resistance | C0.33uF IR15000M | C0.33uF IR*C3000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C8%; DF0.30% (C1uF); DF0.5% (C1uF); IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85 | |
| Climatic Catalogue | 40/85/21 | ||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead tensile strength | No visible damage to appearance | Pull: 2.2 LBS, Time: 5 sec | |
| Lead bending strength | No visible damage to lead | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |
| Vibration | No visible damage to appearance | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |
| Reference Standard | IEC384-2 ; SJ/T 10787-1996 | ||
| Dimensions | W(MAX) | 21.0 mm | Unit: mm |
| H(MAX) | 11.0 mm | ||
| T(MAX) | 5.0 mm | ||
| D 0.05 | 0.6 mm | ||
| L 5.0 | 35.0 mm |
2509180925_Jimson-MEA223J480A01_C7431882.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
