<
>
Specifications
Tolerance:
±10%
Capacitance:
470nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MKP474K275A21
Package:
Through Hole,P=27.5mm
Key Attributes
Model Number:
MKP474K275A21
Product Description
Product Overview
The JIMSON MKP X2 series capacitors are designed for a wide range of applications requiring high stability and reliability. They offer excellent performance across broad temperature and frequency ranges, high current handling capabilities, and long-term operational stability. These capacitors are suitable for line-by-pass, antenna coupling, across-the-line applications, spark killer circuits, FMI filters, and switching power supplies.
Product Attributes
- Brand: JIMSON
- Manufacturer: () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: Xiamen, China
- Product Type: MKP X2 Capacitor
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case, encapsulated with epoxy resin meeting UL94V-0
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded
- Certifications: UL, VDE, ENEC, CQC, CB, KC
- RoHS Compliance: Yes
Technical Specifications
| Specification | Description | Value | Test Conditions | |||
| Capacitance | Rated Capacitance | 0.01-3.3uF | Measuring frequency: 1kHz, Measuring voltage: 1Vrms | |||
| Capacitance Tolerance | K=10% | |||||
| Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | |||||
| Voltage | Rated Voltage | 275-310VAC | ||||
| Voltage Proof | 4.3*UR Unit:VDC (1 minute at 20) | No permanent breakdown or flashover | ||||
| Dissipation Factor | DF 0.1% | (at 20, 1KHz) | Measuring frequency: 1kHz, Measuring voltage: 1Vrms | |||
| DF 3.0% | (at 20, 100KHz) | Measuring frequency: 100kHz, Measuring voltage: 1Vrms | ||||
| Insulation Resistance | C 0.33uF | IR 15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||
| C > 0.33uF | IR*C 5000S | |||||
| Endurance | Criteria (C1uF) | C/C10%, DF0.8% | 1000 hours with 125% of rated voltage at 85. IR 50% of the specified value. | |||
| Criteria (C>1uF) | DF0.5% | |||||
| IR | 50% of the specified value | |||||
| Climatic Catalogue | Code | 40/100/21 | From 85 up to 105 with derating voltage (1.25%/) | |||
| Solderability | Condition | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | |||
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Lead Strength | Tensile Strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec | |||
| Lead Strength | Bending Strength | No visible damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |||
| Vibration | Criteria | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | |||
| Reference Standard | Codes | IEC 60384-14, UL60384, US-25278-UL | ||||
| Model | CAP(uF) | W*H*T (mm) | P (mm) | D (mm) | L (mm) | Remarks |
| MKP224K310A05 | 0.22 | 18.0*13.5*7.5 | 15 | 0.8 | 22 | |
| MKP103K275A08 | 0.01 | 12*11*5 | 10 | 0.6 | 23 | |
| MKP104K275A09 | 0.1 | 18*12*6 | 15 | 0.6 | 3.2 | |
| MKP104K275A18 | 0.1 | 13*12*6 | 10 | 0.6 | 21 | |
| MKP105K275A02 | 1.0 | 26.5*18.5*10.0 | 22.5 | 0.8 | 27 | |
| MKP105K275A29 | 1.0 | 31*18*9 | 27.5 | 0.8 | 30 | |
| MKP105K310A05 | 1.0 | 26*21.5*12 | 22.5 | 0.8 | 25 | |
| MKP124K275A03 | 0.12 | 13*11*5 | 10 | 0.6 | 25 | |
| MKP155K310A01 | 1.5 | 32*22*13 | 27.5 | 0.8 | 25 | |
| MKP184K275A06 | 0.18 | 18*13.5*7.5 | 15 | 0.6 | 25 | |
| MKP224K275A08 | 0.22 | 13*12*6 | 10 | 0.6 | 3.8 | |
| MKP224K275A09 | 0.22 | 13*14*8 | 15 | 0.6 | 21 | |
| MKP224K275A11 | 0.22 | 18*13.5*7.5 | 22.5 | 0.8 | 22 | |
| MKP224K310A09 | 0.22 | 13*12*6 | 10 | 0.6 | 3.8 | |
| MKP224M310A01 | 0.22 | 13*14*8 | 10 | 0.6 | 25 | |
| MKP225K275A17 | 2.2 | 26*21.5*12 | 22.5 | 0.8 | 3.8 | |
| MKP225K275A18 | 2.2 | 26*21.5*12 | 22.5 | 0.8 | 27 | |
| MKP334K275A58 | 0.33 | 18*12*6 | 15 | 0.8 | 3.8 | |
| MKP334K275A59 | 0.33 | 18*12*6 | 15 | UL1015 22# L85 S5 | ||
| MKP335K310A02 | 3.3 | 31*25*14 | 27.5 | 0.8 | 3.8 | |
| MKP473K275A08 | 0.047 | 13*12*6 | 10 | 0.6 | 22 | |
| MKP473K310A05 | 0.047 | 18*10*5 | 15 | 0.6 | 10 | |
| MKP473K310A06 | 0.047 | 13*11*5 | 10 | 0.6 | 25 | |
| MKP474J310A01 | 0.47 | 18*18*10 | 15 | 0.8 | 5 | |
| MKP474K275A11 | 0.47 | 18*18*10 | 15 | UL1015 20# L30 S7 | ||
| MKP474K275A21 | 0.47 | 31*18*9 | 27.5 | 0.8 | 3.8 | |
| MKP474K310A11 | 0.47 | 18*12.5*9 | 15 | 0.8 | 3.8 | |
| MKP474K310A12 | 0.47 | 26.5*17*8.5 | 22.5 | 0.8 | 3.5 | |
| MKP564K275A18 | 0.56 | 26.5*16*7 | 22.5 | 0.8 | 3.8 | |
| MKP684K310A05 | 0.68 | 18*18*10 | 15 | 0.8 | 25 | |
| MKP684K310A06 | 0.68 | 18*18*10 | 15 | 0.8 | 25 | |
| MKP824M310A01 | 0.82 | 18*18*10 | 15 | 0.6 | 25 |
2410121459_Jimson-MKP474K275A21_C7431917.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
