<
>
Specifications
Tolerance:
±10%
Capacitance:
2.2uF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MKP225K275A18
Package:
Through Hole,P=22.5mm
Key Attributes
Model Number:
MKP225K275A18
Product Description
Product Overview
The JIMSON MKP X2 capacitor is designed for various electronic applications, offering high stability, transient endurance, and long-term reliability. It is suitable for line-by-pass, antenna coupling, across-the-line applications, FMI filters, and switching power supplies. This product meets stringent safety and environmental standards, including RoHS compliance.
Product Attributes
- Brand: JIMSON
- Origin: Xiamen, China
- Type: MKP X2 Capacitor
- Material: Polypropylene film dielectric, vacuum evaporated metal electrodes, reinforced flame retardant plastic case.
- Leads: Radial leads of tinned wire/insulation flexible wire.
- Certifications: UL60384-14 (Canada/America), VDE (Germany/Europe), CQC (China), CB (IEC), US-25278-UL, KC (Korea).
- Environmental Compliance: RoHS 2.0
Technical Specifications
| Parameter | Description | Value | Test Conditions |
| Capacitance | Rated Capacitance | 0.01-3.3uF | Measuring frequency: 1kHz, Measuring voltage: 1Vrms |
| Capacitance Tolerance | Capacity Error | K=10% | |
| Voltage | Rated voltage | 275-310VAC | |
| Voltage Proof | Withstand Voltage | 4.3*UR Unit:VDC (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor | Loss Tangent | DF0.1% (at 20,1KHz) DF3.0% (at 20,100KHz) | Measuring frequency: 1k/100kHz, Measuring voltage: 1Vrms |
| Insulation Resistance | IR | C0.33uF IR15000M C0.33uF IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | Durability | C/C10%, DF0.8% (C1uF) DF0.5%;(C>1uF) IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85. |
| Climatic Catalogue | Climate Category | 40/100/21 | From 85up to 105 with derating voltage (1.25%/) |
| Solder ability | Weldability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat shock | Heat Resistance | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. Capacitor appearance should be free of visible damage. |
| Lead tensile strength | Pin Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead bending strength | Pin Bending Strength | Appearance without damage | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | Vibration | Appearance without visible damage | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | Cited Standard | IEC 60384-14, UL60384 |
Detailed Specifications
| Model | Capacitance (uF) | Tolerance | Rated Voltage (VAC) | Pitch (mm) | Lead Diameter (mm) | Body Dimensions (W*H*T, mm) | Remarks |
| MKP224K310A05 | 0.22 | K | 310 | 15 | 0.8 | 18.0*13.5*7.5 | Pressure drop |
| MKP103K275A08 | 0.01 | K | 275 | 10 | 0.6 | 12*11*5 | Taping |
| MKP104K275A09 | 0.1 | K | 275 | 15 | 0.6 | 18*12*6 | |
| MKP104K275A18 | 0.1 | K | 275 | 10 | 0.6 | 13*12*6 | Moisture proof |
| MKP105K275A02 | 1.0 | K | 275 | 22.5 | 0.8 | 26.5*18.5*10.0 | |
| MKP105K275A29 | 1.0 | K | 275 | 27.5 | 0.8 | 31*18*9 | Boxed |
| MKP105K310A05 | 1.0 | K | 310 | 22.5 | 0.8 | 26*21.5*12 | |
| MKP124K275A03 | 0.12 | K | 275 | 10 | 0.6 | 13*11*5 | |
| MKP155K310A01 | 1.5 | K | 310 | 27.5 | 0.8 | 32*22*13 | |
| MKP184K275A06 | 0.18 | K | 275 | 15 | 0.6 | 18*13.5*7.5 | |
| MKP224K275A08 | 0.22 | K | 275 | 10 | 0.6 | 13*12*6 | |
| MKP224K275A09 | 0.22 | K | 275 | 15 | 0.6 | 13*14*8 | High temperature taping |
| MKP224K275A11 | 0.22 | K | 275 | 22.5 | 0.8 | 18*13.5*7.5 | |
| MKP224K310A09 | 0.22 | K | 310 | 10 | 0.6 | 13*12*6 | |
| MKP224M310A01 | 0.22 | M | 310 | 10 | 0.6 | 13*14*8 | |
| MKP225K275A17 | 2.2 | K | 275 | 22.5 | 0.8 | 26*21.5*12 | |
| MKP225K275A18 | 2.2 | K | 275 | 22.5 | 0.8 | 26*21.5*12 | |
| MKP334K275A58 | 0.33 | K | 275 | 15 | 0.8 | 18*12*6 | Pressure drop |
| MKP334K275A59 | 0.33 | K | 275 | 15 | 0.8 | UL1015 wire 22# L85 full stripped tinned S5 black wire | |
| MKP335K310A02 | 3.3 | K | 310 | 27.5 | 0.8 | 31*25*14 | |
| MKP473K275A08 | 0.047 | K | 275 | 10 | 0.6 | 13*12*6 | Taping |
| MKP473K310A05 | 0.047 | K | 310 | 15 | 0.6 | 18*10*5 | Moisture proof |
| MKP473K310A06 | 0.047 | K | 310 | 10 | 0.6 | 13*11*5 | Gray shell |
| MKP474J310A01 | 0.47 | J | 310 | 15 | 0.8 | 18*18*10 | |
| MKP474K275A11 | 0.47 | K | 275 | 15 | 0.8 | 18*18*10 | UL1015 wire 20# L30 half stripped S7 |
| MKP474K275A21 | 0.47 | K | 275 | 27.5 | 0.8 | 31*18*9 | Boxed |
| MKP474K310A11 | 0.47 | K | 310 | 15 | 0.8 | 18*12.5*9 | |
| MKP474K310A12 | 0.47 | K | 310 | 22.5 | 0.8 | 26.5*17*8.5 | |
| MKP564K275A18 | 0.56 | K | 275 | 22.5 | 0.8 | 26.5*16*7 | |
| MKP684K310A05 | 0.68 | K | 310 | 15 | 0.8 | 18*18*10 | |
| MKP684K310A06 | 0.68 | K | 310 | 15 | 0.8 | 18*18*10 | Gray shell |
| MKP824M310A01 | 0.82 | M | 310 | 15 | 0.6 | 18*18*10 |
2410121459_Jimson-MKP225K275A18_C7431908.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
