<
>
Specifications
Tolerance:
±10%
Capacitance:
60uF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MPC606K500D01
Package:
Through Hole,P=37.5mm
Key Attributes
Model Number:
MPC606K500D01
Product Description
JIMSON ELECTRONICS (XIAMEN) CO.,LTD. Capacitors - MPC Series
Product Overview: The JIMSON MPC series capacitors are designed for various electronic applications, offering non-inductive construction, self-healing properties, and excellent moisture resistance. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment. These capacitors also provide protection against peak voltage and current in power electronic devices.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Marking Method: UV ink or laser engraving
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions | ||||
|---|---|---|---|---|---|---|
| 1. SPECIFIC REFERENCE DATA | ||||||
| Capacitance (Rated Capacitance) | 0.01-60uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | ||||
| Capacitance Tolerance | J=5% / K=10% | |||||
| Rated Voltage | 250-2000VDC | |||||
| Voltage Proof | No permanent breakdown or arcing (1 minute at 20) | 1.6*Urated (1 minute at 20) | ||||
| Dissipation Factor (DF) | DF0.1% (for C10uF) DF0.2% (for C<10uF) | at 20, 1kHz, 1Vrms.max. | ||||
| Insulation Resistance (IR) | C0.33uF: IR30000M C0.33uF: IR*C5000S | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test. | ||||
| Climatic Catalogue | 40/85/21 | |||||
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Heat Shock | C/C5%, DF1.2*specified value. Capacitor appearance should be free of visible damage after the test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||
| Lead Tensile Strength | No visible damage to leads. | Pull: 2.2 LBS, Time: 5 sec | ||||
| Lead Bending Strength | No visible damage to leads. | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | ||||
| Vibration | No visible damage to appearance. | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | ||||
| 3. FEATURE | ||||||
| Non-inductive construction and self-healing | ||||||
| High property moisture resistance | ||||||
| Super physical and environmental characteristics | ||||||
| 4. APPLICATION | ||||||
| Filter and noise suppression circuit | ||||||
| Pulse, logic, and timing circuit | ||||||
| Dc-blocking, by-passing and signal coupling in general communications equipment | ||||||
| Widely used in power electronic equipment when the peak voltage, peak current Absorption protection | ||||||
| 7. WEATHERABILITY TESTING METHODS | ||||||
| High temperature (85) | Capacitance drift: +5% max of initial value. DF value: <0.2% (at 1KHz) | After thermal stability | ||||
| Low temperature (-40) | Capacitance drift: -5% max of initial value. DF value: <0.15% (at 1KHz) | After thermal stability | ||||
| Humidity (85, 85% RH) | Capacitance drift: +10% max of initial value. DF value: <0.2% (at 1KHz). Insulation resistance: >50% of initial value. | 10001% hs. After this, take out for 16 hours. | ||||
| 10. DIMENSION | ||||||
| Model | CAP (uF) | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | Remarks |
| MPC103J2000D02 | 0.01 | 18*12*6 | L25 | P15 | CP0.6 | YELLOW |
| MPC104J630D04 | 0.1 | 18*18*10 | L25 | P15 | CP0.8 | YELLOW, Double film |
| MPC104K520D01 | 0.1 | 13*12*6 | L25 | P10 | CP0.6 | YELLOW |
| MPC105J1000D01 | 1.0 | 32*20*11 | L3.8 | P27.5 | CP0.8 | YELLOW |
| MPC105K1000D02 | 1.0 | 41.5*31.4*24 | L25 | P37.5 | CP1.0 | YELLOW |
| MPC105K450D01 | 1.0 | 18*18*10 | L23 | P15 | CP0.8 | YELLOW |
| MPC106J650D01 | 10.0 | 41.5*24*19 | L21 | P37.5 | CP0.8 | YELLOW, 4 pins, B=12.7 |
| MPC155K100D01 | 1.5 | 15*17*7 | L20 | P12.5 | CU0.8 | YELLOW |
| MPC155K450D01 | 1.5 | E8 | L25 | P22.5 | CP0.8 | YELLOW |
| MPC156K1200D01 | 15.0 | 42.5*38*25 | L21 | P37.5 | CU0.8 | YELLOW |
| MPC156K900D01 | 15.0 | 42*36*23 | L25 | P37.5 | CU0.8 | BLACK shell, yellow glue |
| MPC224J630A01 | 0.22 | 18*16*10 | L25 | P15 | CP0.6 | YELLOW |
| MPC226K1200D01 | 22.0 | 58*40*28 | L21 | P52.5 | CU1.0 | YELLOW, Box type |
| MPC332J1000D02 | 0.0033 | 13*9*4 | L25 | P10 | CP0.6 | YELLOW |
| MPC332J2000D01 | 0.0033 | 18*12*6 | L25 | CP0.6 | L25 | GRAY shell, yellow glue |
| MPC333K1000A01 | 0.033 | 18*12*6 | L25 | P15 | CP0.8 | YELLOW, Double film |
| MPC335K250D01 | 3.3 | 31*25*14 | L25 | P27.5 | CP0.8 | YELLOW |
| MPC335K450D01 | 3.3 | 32*20*11 | L25 | P27.5 | CP0.8 | YELLOW |
| MPC473J630D05 | 0.047 | 18*12*6 | L3.8 | P15 | CP0.6 | YELLOW |
| MPC504J1000D01 | 0.05 | 38*30*20 | L21 | P30.5 | CP0.8 | BLACK shell, yellow glue |
| MPC504J1000D02 | 0.05 | 32*33*18 | L3.5 | P27.5 | CU1.0 | YELLOW, Irregular box type |
| MPC565M250D01 | 5.6 | 31*25*14 | L30 | P27.5 | CP0.8 | YELLOW |
| MPC605K1200D01 | 6.0 | 41.5*31.4*24 | L25 | P37.5 | CP1.0 | YELLOW |
| MPC606K500D01 | 60.0 | 42.5*50*35 | L21 | P37.5 | CP0.8 | YELLOW, 4 pins, B=20.3 |
| MPC805K1000D01 | 8.0 | 32*37*22 | L23 | P27.5 | CP0.8 | YELLOW |
| 11. Caution - Soldering Suggestion | ||||||
| Maximum Soldering Temperature | 270 | 4S | ||||
| Pre-heating | 105 | 1min | ||||
| 12. Storage Environment and Conditions | ||||||
| Storage Environment | Temperature 30, Humidity 70% (MBB not opened) | Ensures 24 months storage period. | ||||
| Storage Condition | Avoid exposure to high temperature and humidity. Store in atmosphere without hydrogen chloride, hydrogen sulfide, sulfuric acid etc. | To prevent solderability degradation. | ||||
2410121441_Jimson-MPC606K500D01_C7431957.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
