<
>
Specifications
Tolerance:
±10%
Capacitance:
470nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MRC474K300A02
Key Attributes
Model Number:
MRC474K300A02
Product Description
Product Overview
The JIMSON MRC series capacitor is a 0.47uF capacitor with a 47 resistor, rated at 300VAC. Designed for PCB mounting, it offers superior performance, small size, and is suitable for AC or DC applications. It provides protection for contacts from noise during switching operations and protects electronic instruments during the operation of relays, solenoids, and motors. It is also effective in eliminating electrical noise from semiconductor equipment.
Product Attributes
- Brand: JIMSON
- Manufacturer: (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.)
- Origin: CHINA
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Tinned Wire or polyvinylchloride (PVC) insulation stranded copper wire
- Resistance: Non-Inductive, high pulse resistor
- Certifications: GB/T14472-1998, CQC03001002848, EN132400, IEC60384-14, SE/0364-, UL 1283 (E221606)
- Environmental Compliance: RoHS 2.0
- Color: YELLOW (for the specific example)
Technical Specifications
| Parameter | Description | Value | Test Conditions |
|---|---|---|---|
| Capacitance | Rated Capacitance | 0.47uF | Measuring frequency: 1kHz, Measuring voltage: 1V |
| Capacitance Tolerance | K=10% | ||
| Voltage | Rated voltage | 300VAC | |
| Voltage Proof | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown and arcing | |
| Resistance | Resistance value | 47 | |
| Dissipation Factor | DF9.12% | (at 20,1KHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. | |
| Insulation Resistance | C0.33uF | IR15000M | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Insulation Resistance | C 0.33uF | IR*C5000S | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C10%; DF0.8% (C1uF) | 1000 hours with 125% of rated voltage at 85. | |
| Endurance | DF0.5%;(C>1uF) | 1000 hours with 125% of rated voltage at 85. | |
| Endurance | IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. | |
| Climatic Catalogue | 40/100/21 | ||
| Solder ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | |
| Heat shock | C/C5% DF1.2* | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | |
| Lead tensile strength | Pull2.2 LBS | time: 5 sec, No visible damage to the appearance | |
| Lead bending strength | Load of lead1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position, No visible damage to the lead | |
| Vibration | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each directions with a total of 6 hours, No visible damage to the appearance | ||
| Reference Standard | IEC 60384-14, EN60384-14 | ||
| Construction | Dielectric | Polypropylene film | |
| Construction | Electrodes | Vacuum evaporated metal | |
| Construction | Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin meeting the requirement of-UL94V-0 | |
| Construction | Leads | Tinned Wire or polyvinylchloride(PVC)insulation stranded copper wire | |
| Construction | Resistance | Non-Inductive, high pulse resistor | |
| Construction | Terminal contact | Electrically welded | |
| Marking | Manufacturer | JIMSON | |
| Marking | Manufacturers type designation | MRC | |
| Marking | Rated capacitance | 0.47uF | |
| Marking | Tolerance | K=10% | |
| Marking | Rated voltage | 300VAC | |
| Marking | Climatic catalogue | GMF | |
| Marking | Sub-class | X2 | |
| Marking | Safety approvals | All achieved approvals shown on Page 2 | |
| Marking | Reference standard | IEC60384-14 | |
| Capacitance Coding | Example: 474 | 47 x 10^4 pF = 0.47uF | Three digits: first two are significant digits, third is exponent (PF unit) |
| Capacitance Tolerance Symbol | K | 10% | |
| Rated Voltage Symbol | 300VAC | ||
| Dimensions (Example) | W | 26.5 mm | 0.5 |
| Dimensions (Example) | H | 18.5 mm | 0.5 |
| Dimensions (Example) | T | 10.0 mm | 0.5 |
| Dimensions (Example) | L1/L2 | 100.0 mm | 5.0 |
| Dimensions (Example) | S | 5.0 mm | 1.0 |
| Dimensions (Example) | Lead | 20# | |
| Storage Conditions | Storage Environment | Temp 30, Humidity 70% (in MBB) | Guarantees 24 months storage if MBB is not opened. Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | 4S (Soldering time) |
| Soldering Suggestion | Pre-heating | 105 | 1min |
2509180925_Jimson-MRC474K300A02_C7432018.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
