<
>
Specifications
Tolerance:
±5%
Voltage Rating:
63V
Capacitance:
1uF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEB105J063D01
Package:
Through Hole,P=5mm
Key Attributes
Model Number:
MEB105J063D01
Product Description
Product Overview
The JIMSON MEB series capacitors are polyester film capacitors with vacuum-evaporated metal electrodes, encapsulated in a reinforced flame-retardant plastic case sealed with epoxy resin. They feature small size, low loss, good stability, excellent self-healing properties, and long life. These capacitors are widely used in coupling, filtering, noise suppression, and bypassing applications in DC and pulse circuits for both investment and consumer electronics.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case, epoxy resin sealed (UL94V-0)
- Leads: Radial leads of tinned wire
- Terminal Contact: Electrically welded
- Certifications: RoHS 2.0 Compliant
- Color: Gray (body)
Technical Specifications
| Specification | Description | Value | Test Conditions |
| Capacitance | Rated Capacitance | 0.0047uF, 1.0uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5% | ||
| Capacitance Unit Conversion | 1F=1,000mF=1,000,000uF=1,000,000,000nF=1,000,000,000,000pF | ||
| Voltage | Rated Voltage | 100VDC, 63VDC | |
| Voltage Proof | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown or flashover | |
| Dissipation Factor (DF) | Max Value | DF1.0% | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Post Heat Shock | DF1.2* | Solder bath: 2605, 5.00.5 sec | |
| Insulation Resistance (IR) | For C0.33uF | IR5000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| For C0.33uF | IR*C3000S | ||
| Post Endurance Test (C>1uF) | IR 50% of the specified value | 1000 hours with 125% of rated voltage at 85 | |
| Endurance | C/C5%; DF0.20% | 1000 hours with 125% of rated voltage at 85 | |
| Climatic Catalogue | 40/85/21 | ||
| Solderability | Solder coverage | 75% of the circumference of the lead | Solder bath: 2355, 2.00.5 sec |
| Lead Tensile Strength | Pull: 2.2 LBS, Time: 5 sec | No visible damage | |
| Lead Bending Strength | Load of lead: 1.1 LBS | No visible damage | The body of capacitor is bent 90 degrees and returned to its original position |
| Vibration | Appearance | No visible damage | Frequency cycle: 10Hz to 55Hz then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC60384-2, GB7322 | ||
| High Temperature Test (85) | Capacitance Drift | +5% max of initial value | After thermal stability |
| Dissipation Factor | <0.2% at 1KHz | After thermal stability | |
| Low Temperature Test (-40) | Capacitance Drift | -5% max of initial value | After thermal stability |
| Dissipation Factor | <0.15% at 1KHz | After thermal stability | |
| Humidity Test (40, 90-95% RH for 964h, then 16h recovery) | Capacitance Drift | +3% max of initial value | |
| Dissipation Factor | <0.15% at 1KHz | ||
| Insulation Resistance | >50% of initial value |
2409291103_Jimson-MEB105J063D01_C434204.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
