<
>
Specifications
Tolerance:
±5%
Capacitance:
10nF
Dielectric Material:
Polypropylene Film
Mfr. Part #:
MPC103J2000D02
Package:
Through Hole,P=15mm
Key Attributes
Model Number:
MPC103J2000D02
Product Description
Product Overview
The JIMSON MPC series capacitors, manufactured by () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.), are designed for a wide range of electronic applications. These non-inductive, self-healing capacitors feature high moisture resistance and excellent environmental adaptability. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment. Additionally, they provide protection against peak voltage and current in power electronic devices.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal connection: Electrically welded
- Marking: UV ink or laser engraving
- Reference Standards: IEC 60384-16, GB10190
Technical Specifications
| Description | Value | Test Conditions |
| Capacitance | ||
| Rated Capacitance | 0.01-60uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5% / K=10% | |
| Voltage | ||
| Rated Voltage | 250-2000VDC | |
| Voltage Proof | 1.6*U (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (tangent of loss) | ||
| DF | 0.1% (for C10uF) | at 20, 1KHz, 1Vrms.max. |
| DF | 0.2% (for C<10uF) | at 20, 1KHz, 1Vrms.max. |
| Insulation Resistance | ||
| IR | 30000M (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| IR*C | 5000S (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | ||
| Conditions | 1000 hours with 125% of rated voltage at 85 | C/C5%; DF0.40%; IR50% of the specified value |
| Climatic Catalogue | ||
| Category | 40/85/21 | |
| Solderability | ||
| Conditions | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | Solder should cover at least 75% of the circumference of the lead |
| Heat Shock (Soldering Heat Resistance) | ||
| Conditions | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | C/C5%, DF1.2*specified value. No visible damage after test. |
| Lead Tensile Strength | ||
| Load | 2.2 LBS | Time: 5 sec. No visible damage. |
| Lead Bending Strength | ||
| Load | 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position. No visible damage. |
| Vibration | ||
| Conditions | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | No visible damage. |
Dimensions
| SYMBOL | CAP (uF) | COLOR | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | REMARKS |
| MPC103J2000D02 | 0.01 | YELLOW | 18*12*6 | 25 | 15 | CP0.6 | L25 |
| MPC104J630D04 | 0.1 | YELLOW | 18*18*10 | 25 | 15 | CP0.8 | Double film |
| MPC104K520D01 | 0.1 | YELLOW | 13*12*6 | 25 | 10 | CP0.6 | |
| MPC105J1000D01 | 1.0 | YELLOW | 32*20*11 | 3.8 | 27.5 | CP0.8 | |
| MPC105K1000D02 | 1.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC105K450D01 | 1.0 | YELLOW | 18*18*10 | 23 | 15 | CP0.8 | |
| MPC106J650D01 | 10.0 | YELLOW | 41.5*24*19 | 21 | 37.5 | CP0.8 | Four pin, B=12.7 |
| MPC155K100D01 | 1.5 | YELLOW | 15*17*7 | 20 | 12.5 | CU0.8 | |
| MPC155K450D01 | 1.5 | YELLOW | E8 | 25 | 22.5 | CP0.8 | |
| MPC156K1200D01 | 15.0 | YELLOW | 42.5*38*25 | 21 | 37.5 | CU0.8 | Four pin, B=20.3 |
| MPC156K900D01 | 15.0 | BLACK | 42*36*23 | 25 | 37.5 | CU0.8 | Black case yellow glue |
| MPC224J630A01 | 0.22 | YELLOW | 18*16*10 | 25 | 15 | CP0.6 | |
| MPC226K1200D01 | 22.0 | YELLOW | 58*40*28 | 21 | 52.5 | CU1.0 | Boxed |
| MPC332J1000D02 | 0.0033 | YELLOW | 13*9*4 | 25 | 10 | CP0.6 | |
| MPC332J2000D01 | 0.0033 | YELLOW | 18*12*6 | 25 | CP0.6 | L25 | Gray yellow glue |
| MPC333K1000A01 | 0.033 | YELLOW | 18*12*6 | 25 | 15 | CP0.8 | Double film |
| MPC335K250D01 | 3.3 | YELLOW | 31*25*14 | 25 | 27.5 | CP0.8 | |
| MPC335K450D01 | 3.3 | YELLOW | 32*20*11 | 25 | 27.5 | CP0.8 | |
| MPC473J630D05 | 0.047 | YELLOW | 18*12*6 | 3.8 | 15 | CP0.6 | |
| MPC504J1000D01 | 0.05 | BLACK | 38*30*20 | 21 | 30.5 | CP0.8 | Black case yellow glue |
| MPC504J1000D02 | 0.05 | YELLOW | 32*33*18 | 3.5 | 27.5 | CU1.0 | Irregular box |
| MPC565M250D01 | 5.6 | YELLOW | 31*25*14 | 30 | 27.5 | CP0.8 | |
| MPC605K1200D01 | 6.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC606K500D01 | 60.0 | YELLOW | 42.5*50*35 | 21 | 37.5 | CP0.8 | Four pin, B=20.3 |
| MPC805K1000D01 | 8.0 | YELLOW | 32*37*22 | 23 | 27.5 | CP0.8 |
2410121441_Jimson-MPC103J2000D02_C7431934.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
