<
>
Specifications
Tolerance:
±10%
Voltage Rating:
630V
Capacitance:
220nF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEF224K630D03
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MEF224K630D03
Product Description
Product Overview
This specification details the JIMSON (JS) MEF series capacitors, designed for high reliability and superior performance in low-frequency applications. These non-inductive, self-healing capacitors are ideal for filter and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in general communication equipment. They are manufactured by Zixin Electronics (Xiamen) Co., Ltd. and comply with RoHS 2.0 environmental directives.
Product Attributes
- Brand: JIMSON (JS)
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire
- Certifications: RoHS 2.0 Compliant
Technical Specifications
| Description | Value | Test Conditions | ||||||
| Capacitance | ||||||||
| Rated Capacitance | 0.01uF, 0.022uF, 0.047uF, 0.1uF, 0.22uF, 0.68uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | ||||||
| Capacitance Tolerance | K=10% | |||||||
| Voltage | ||||||||
| Rated Voltage | 630VDC | |||||||
| Voltage Proof | 1.6*UR Unit:VDC (5 S at 20) | No permanent breakdown or flashover | ||||||
| Dissipation Factor (tangent of loss) | ||||||||
| DF | 0.8% (C1.0uF); 1.0% (C>1.0uF) | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | ||||||
| Insulation Resistance | ||||||||
| IR | 15000M (C0.33uF); IR*C3000S (C0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||||
| Endurance | ||||||||
| C/C | 8% | 1000 hours with 125% of rated voltage at 85. | ||||||
| DF | 0.30% (C1uF); 0.5% (C1uF) | |||||||
| IR | 50% of the specified value | |||||||
| Climatic Catalogue | ||||||||
| Climate Catalogue | 40/85/21 | |||||||
| Solderability | ||||||||
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Heat Shock | ||||||||
| Heat Shock | C/C5% DF1.2* | Solder bath: 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Lead Strength | ||||||||
| Lead Tensile Strength | Appearance without damage | Pull: 2.2 LBS; Time: 5 sec | ||||||
| Lead Bending Strength | Appearance without damage | Load of lead: 1.1 LBS; The body of capacitor is bent 90 degrees and returned to its original position | ||||||
| Vibration | ||||||||
| Vibration | Appearance without visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each direction (total 6 hours) | ||||||
| Reference Standard | ||||||||
| Reference Standard | IEC384-2 grade 1; SJ/T 10787-1996 | |||||||
| Dimensions (Unit: mm) | ||||||||
| Symbol | Capacitance | Color | W Max | H Max | T Max | P 1.0 | D 0.05 | L +5/-10 |
| 103J630D02 | 0.01uF | Brown | 12.0 | 9.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 223J630D02 | 0.022uF | Brown | 13.0 | 10.0 | 5.0 | 10.0 | 0.6 | 25.0 |
| 473J630D02 | 0.047uF | Brown | 13.0 | 10.0 | 6.0 | 10.0 | 0.6 | 25.0 |
| 104J630D01 | 0.1uF | Brown | 18.0 | 14.0 | 8.0 | 15.0 | 0.8 | 25.0 |
| 224K630D03 | 0.22uF | Brown | 23.0 | 15.0 | 9.0 | 20.0 | 0.8 | 25.0 |
| 684K630D01 | 0.68uF | Brown | 30.0 | 22.0 | 13.0 | 27.5 | 0.8 | 25.0 |
2410121459_Jimson-MEF224K630D03_C434335.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
