<
>
Specifications
Tolerance:
±10%
Voltage Rating:
100V
Capacitance:
2.2uF
Operating Temperature:
-40℃~+85℃
Dielectric Material:
Polyester
Mfr. Part #:
MEF225K100D06
Package:
Through Hole,P=20mm
Key Attributes
Model Number:
MEF225K100D06
Product Description
Product Overview
The JIMSON ELECTRONICS (XIAMEN) CO.,LTD. MEF Capacitor (2.2/4.7uF K 100VDC) offers high reliability and superior performance in low-frequency applications. Featuring a non-inductive construction and self-healing capabilities, this capacitor is ideal for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.
Product Attributes
- Brand: JIMSON ELECTRONICS (XIAMEN) CO.,LTD.
- Origin: Xiamen, China
- Dielectric Material: Polyester film
- Electrodes: Vacuum evaporated metal
- Coating: Epoxy resin (fire retardant on request)
- Leads: Radial leads of tinned wire
- Certifications: RoHS 2.0 compliant
- Color: Brown (as per outline drawing)
Technical Specifications
| Specification | Description | Value | Test Conditions | ||||||
| Capacitance | Rated Capacitance | 4.7uF, 2.2uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max. | ||||||
| Capacitance Tolerance | K=10% | ||||||||
| Voltage | Rated Voltage | 100VDC | 1.6*UR Unit:VDC (5 S at 20) | ||||||
| Voltage Proof | No permanent breakdown or arcing | ||||||||
| Dissipation Factor (tangent of loss) | DF0.8% | (C1.0uF) Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max. | |||||||
| DF1.0% | C>1.0uF Measuring frequency: 1kHz10%, Measuring voltage: 1Vms.max. | ||||||||
| Insulation Resistance | C0.33uF | IR15000M | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | ||||||
| C0.33uF | IR*C3000S | ||||||||
| Endurance | C/C | 8% | 1000 hours with 125% of rated voltage at 85. | ||||||
| DF | 0.30% (C1uF); DF0.5% (C1uF) | ||||||||
| IR | 50% of the specified value; | ||||||||
| Climatic Catalogue | 40/85/21 | ||||||||
| Solderability | Solder coverage | 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Appearance | No visible damage | ||||||||
| Heat Shock | C/C | 5% | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| DF | 1.2*specified value | ||||||||
| Lead Tensile Strength | No visible damage | Pull: 2.2 LBS, Time: 5 sec | |||||||
| Lead Bending Strength | No visible damage | Load of lead: 1.1 LBS, The body of capacitor is bent 90 degrees and returned to its original position | |||||||
| Vibration | Appearance | No visible damage | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours | ||||||
| Reference Standard | IEC384-2 grade 1; SJ/T 10787-1996 | ||||||||
| Outline Drawing | Model | Capacitance | Color | W Max | H Max | T Max | P 1.0 | D 0.05 | L +5/-10 |
| 475K100D01 | 4.7uF | Brown | 26.0 | 21.0 | 10.0 | 22.5 | 0.8 | 25.0 | |
| 225K100D06 | 2.2uF | Brown | 23.0 | 16.0 | 10.0 | 20.0 | 0.8 | 25.0 | |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | Time: 4S | ||||||
| Storage Environment and Conditions | Storage Environment | Temperature 30, Humidity 70% (MBB not open) | Storage period: 24 months | ||||||
| Storage Condition | Avoid high temperature and high humidity; presence of hydrogen chloride, hydrogen sulfide, sulfuric acid, etc. in the atmosphere can degrade solderability. | Store under specified storage environment conditions. |
2409291103_Jimson-MEF225K100D06_C434291.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
