<
>
Specifications
Capacitance:
100nF
Operating Temperature:
-40℃~+85℃
Tolerance:
±5%
Voltage Rating:
250V
Mfr. Part #:
MPC104J250D01
Package:
Through Hole,P=10mm
Key Attributes
Model Number:
MPC104J250D01
Product Description
Product Overview
The JIMSON (JS) MPC Series Capacitor is a non-inductive polypropylene film capacitor designed for general communication equipment. It offers self-healing properties, high moisture resistance, excellent physical and environmental characteristics, and long-term stability. This capacitor is ideal for filtering and noise suppression circuits, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling applications.
Product Attributes
- Brand: JIMSON (JS)
- Customer: (LICHIP)
- Product Type: Capacitor
- Series: MPC
- Dielectric: Polypropylene film
- Electrodes: Vacuum evaporated metal
- Coating: Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin (UL94V-0)
- Leads: Radial leads of tinned wire/insulation flexible wire
- Terminal Contact: Electrically welded (arc spot welding)
- Color: Yellow
- Certifications: RoHS Compliant (RoHS 2.0)
Technical Specifications
| Specification | Description | Test Conditions |
|---|---|---|
| Rated Capacitance | 0.1uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Capacitance Tolerance | J=5% | |
| Rated Voltage | 250VDC | |
| Voltage Proof | No permanent breakdown or flashover | 1.6*UR, Unit:VDC (1 minute at 20) |
| Dissipation Factor (DF) | 0.1% | (at 20, 1kHz), Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms max. |
| Insulation Resistance (IR) | 30000M (for C0.33uF) IR*C 5000S (for C > 0.33uF) | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | C/C5%; DF0.40%; IR50% of the specified value | 1000 hours with 125% of rated voltage at 85. After the test |
| Climatic Catalogue | 40/85/21 | |
| Solderability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock (Soldering Heat) | C/C5%, DF1.2*specified value. No visible damage after test. | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Lead Tensile Strength | No visible damage. | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | No visible damage. | Load of lead: 1.1 LBS (The body of capacitor is bent 90 degrees and returned to its original position) |
| Vibration | No visible damage. | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) |
| Reference Standard | IEC 384-16, GB10190 | |
| Dimensions (MPC104J250VDC) | W: 13.00.5, H: 11.00.5, T: 5.00.5, P: 10.01.0, D: 0.60.05, L: 25.05.0 | Unit: mm |
| Maximum Soldering Temperature | 270 | 4S |
| Pre-heating Temperature | 105 | 1min |
| Storage Environment | Temperature 30, Humidity 70% (MBB unopened) | Guarantees 24 months storage period. Avoid exposure to hydrogen chloride, hydrogen sulfide, sulfuric acid, high temperature and high humidity. |
2410121646_Jimson-MPC104J250D01_C434319.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
